PXI-8105 Datasheet, PDF (2/6 Pages) National Instruments Corporation – Intel Core Duo Processor T2500(2.0 GHz dual core)

2.0 GHz Dual-Core Embedded Controller for PXI
945GM Express chipset to deliver maximum performance, flexibility, and
stability. A block diagram of the PXI-8105 is shown in Figure 3.
CPU
Front-side bus
Intel Core Duo Processor T2500
(2.0 GHz Dual Core)
667 MHz
L2 cache
Dual-channel 667 MHz DDR2 RAM, standard
2048 KB
512 MB (1 x 512 MB)
Dual-channel 667 MHz DDR2 RAM, maximum
Hard drive, minimum
10/100/1000 BASE-TX Ethernet
GPIB (IEEE 488) controller
Serial port (RS232)
Parallel port
Hi-Speed USB ports
4 GB (2 x 2 GB)
60 GB SATA¹




4
ExpressCard/34 slot
PS/2 keyboard/mouse connector
Watchdog/trigger SMB
Installed OS

_2

Windows XP Professional³
1_{30 GB PATA hard drive for extended temperature option}
2_{For a legacy PS/2 keyboard and mouse, add the USB-to-dual-PS/2 adapter USP-to-dual-PS/2}
3_{Contact National Instruments or visit ni.com/pxiadvisor for information on other available}
operating systems
Table 1. PXI-8105 Features
Peripheral I/O
The PXI-8105 includes high-performance peripheral I/O such as
10/100/1000BASE-TX (gigabit) Ethernet and four Hi-Speed USB ports
for connection to a keyboard, a mouse, a CD-ROM/DVD-ROM drive for
software installation, or other standard PC peripherals such as USB
speakers, printers, or memory sticks. Use the IEEE 1284 ECP/EPP parallel
port to connect to a wide variety of devices, including tape backup
drives, printers, and scanners. An RS232 port is available for connecting
to serial devices. Additionally, the PXI-8105 includes an integrated GPIB
(IEEE 488) controller, which provides control of external instrumentation,
saving additional cost and a slot.
ExpressCard
The PXI-8105 includes an ExpressCard/34 slot. ExpressCard uses
the PCI Express and Hi-Speed USB serial interfaces to provide up to
2.5 Gb/s of bidirectional throughput. Use the ExpressCard/34 slot
to add a second gigabit Ethernet port to your system or additional
peripheral I/O such as external SATA hard drives, 802.11 wireless
LAN, IEEE 1394, Bluetooth, or various memory adapters.
Figure 2. This PXI-8105 controls an 8-slot PXI modular instrumentation system.
Trigger Input/Output and Watchdog
The PXI-8105 includes an external SMB connection for use as a trigger
input, output, or watchdog timer. Use the external SMB to pass trigger
and timing signals into and out of the PXI trigger bus in your system.
Intel Core 2 Duo
CPU
2 SO-DIMM
DDR2 SDRAM
PC2 5400
DUAL CH
Chipset
Graphics
Memory
Controller
Hub
ExpressCard/34
DMI Interface
DVI-I
Connector
GPIB
4 Hi-Speed
USB Ports
Gigabit
Ethernet
Hard Drive
LPT 1
COM 1
Chipset
I/O Controller
Hub
PCI Bus
PXI
Connector/
Triggers
LPC Bus
Super I/O
SMB to
Triggers
Watchdog
SMB
Figure 3. PXI-8105 Block Diagram
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
2