PXI-2569 Datasheet, PDF (2/3 Pages) National Instruments Corporation – 100 independent single-pole single-throw (SPST) relays

High-Density General-Purpose SPST Relays
Specifications
Specifications subject to change without notice. Visit ni.com/manuals for
the latest full specifications.
Input Characteristics
Maximum switching voltage
Channel-to-ground ............................
Channel-to-channel ..........................
Maximum current .............................
Simultaneous channels at
maximum current (±35 °C)................
Maximum switching power ..................
Typical DC path resistance
Initial .................................................
End of life..........................................
Thermal EMF.....................................
Bandwidth (-3 dB, typical at 23 °C) ......
300 V, CAT I
300 V
1A
(switching or carry, per channel)
50
60 W, 62.5 VA (DC to 60 Hz)
(per channel, resistive)
<0.55 Ω
≤1 Ω
≤12 μV
≤20 MHz
Dynamic Characteristics
Maximum speed....................................
Relay operate plus debounce time
Typical ...............................................
Maximum ..........................................
Expected relay life
Mechanical .......................................
Electrical
10 VDC, 100 mADC, resistive ...........
10 VDC, 1 ADC, resistive ..................
30 VDC, 1 ADC resistive ...................
60 VDC, 1 ADC resistive ...................
145 cycles
1 ms
3.4 ms
10⁸ cycles
2.5x10⁶ cycles
1x10⁶ cycles
5x10⁵ cycles
1x10⁵ cycles
Physical
Relay types............................................
Contact material ...................................
I/O connectors.......................................
Dimensions............................................
Electromechanical, latching
Palladium-ruthenium, gold covered
200 POS LFH Matrix 50, receptacle
10 by 17.5 cm (3.9 by 6.9 in.), 1 3U slot
Environment
Operating temperature..........................
Storage temperature.............................
Relative humidity ..................................
Pollution degree ....................................
Approved at altitudes up to 2,000 m.
0 to 55 °C
-20 to 70 °C
5 to 85% noncondensing
2
Safety Compliance
■ _{IEC 61010-1, EN 61010-1}
■ _{UL 61010-01, CSA 61010-1}
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for
electrical equipment for measurement, control, and laboratory use:
■ _{EN 61326 (IEC 61326): Class A emissions; Basic immunity}
■ _{EN 55011 (CISPR 11): Group 1, Class A emissions}
■ _{AS/NZS CISPR 11: Group 1, Class A emissions}
■ _{FCC 47 CFR Part 15B: Class A emissions}
■ _{ICES-001: Class A emissions}
Note: For EMC compliance, operate this product according to the documentation.
CE Compliance
This product meets the essential requirements of applicable European Directives
as follows:
■ _{2006/95/EC; Low-Voltage Directive (safety)}
■ _{2004/108/EC; Electromagnetic Compatibility Directive (EMC)}
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
2