WAP-3701 Datasheet, PDF (1/3 Pages) National Instruments Corporation – IEEE 802.11g/b compliance / 0 to 60 °C operating temperature

Industrial Wireless Access Points, Clients, and Bridges
NI WAP-3701, NI WAP-3711
Industrial Features
• IEEE 802.11g/b compliance
• 0 to 60 °C operating temperature
• Redundant dual 24 VDC power inputs
• A single device supports a wireless
access point, client, and bridge
• DIN-rail or panel mounting support
• Metal enclosure, IP30 rated
• Class I, Division 2 hazardous locations
Wireless Security Features
• 64- and 128-bit wired equivalent
privacy (WEP)
• Enabling/disabling service set identifier
(SSID) broadcasts
• MAC-address-based access control
• IEEE 802.1X/RADIUS
• Wi-Fi Protected Access (WPA)
Software and
Remote Configuration
• Web-based management included
• Simple Network Management Protocol
(SNMP) and Universal Plug and Play
(UPnP) support
• Configuration backup and reset
Overview
National Instruments WAP-37x1 wireless access points (WAPs) add
wireless connectivity to all Ethernet-based programmable automation
controllers (PACs) such as NI CompactRIO and Compact FieldPoint.
You can convert your PACs to wireless systems to reduce wiring costs or
access remote locations and use the NI LabVIEW graphical development
environment with both of these WAPs.
An NI WAP-37x1 connects wireless devices to a wired network –
it has an IP address so other wireless clients can access the device.
A WAP-37x1 can also serve as a Dynamic Host Configuration Protocol
(DHCP) server and configure other WAP-37x1 devices as wireless clients.
A single WAP-37x1 typically can support up to 30 client devices, with the
range depending on the wireless antennae selection. A WAP-37x1 also
serves as a wireless bridge and allows two devices to talk to each other.
The NI WAP-3701 supports the IEEE 802.11 North American 2.4 GHz
band with channels from 1 to 11, and the NI WAP-3711 supports 2.4 GHz
international frequency bands with channels 1 to 13.
62.91 mm
(2.48 in.)
45.80 mm
(1.81 in.)
30.29 mm
(1.19 in.)
105.00 mm
(4.13 in.)
Side View
DIN-Rail
Kit
NATIONAL
INSTRUMENTS
PWR1
PWR2
WLAN
MAIN
LAN
135.00 mm
(5.31 in.)
44.00 mm
(1.73 in.)
LAN
52.98 mm
(2.09 in.)
45.80 mm
(1.80 in.)
Front View
Rear View
18.20 mm
(0.72 in.)
Panel
Mounting Kit
NI WAP-37x1 Mechanical Dimensions
Industrial Features
NI WAPs offer a dual redundant power supply with a 12 to 45 VDC input
range. They are rated for 0 to 60 °C operating temperature and feature
an IP30-rated metal enclosure for deployment in harsh environments.
A DIN-rail and panel mounting bracket is included with each WAP-37x1.
Ordering Information
NI WAP-3701 ........................................................................780036-01
NI WAP-3711 ........................................................................780037-01
Accessory
NI PS-5 Power Supply ..........................................................778805-90
BUY NOW!
For complete product specifications, pricing, and accessory
information, call 800 813 3693 (U.S.) or go to ni.com/comm.