|
USB-9215A Datasheet, PDF (1/2 Pages) National Instruments Corporation – Portable USB-Based DAQ with Simultaneous Sampling | |||
|
Portable USB-Based DAQ with Simultaneous Sampling
NI USB-9215A (Windows)
⢠Small, portable devices
(12.1 by 8.6 by 2.5 cm)
⢠4 channels of 16-bit simultaneously
sampled analog input
⢠Built-in, removable connectors for easier
and more cost-effective connectivity
⢠250 Vrms channel-to-earth
ground isolation
⢠Plug-and-play connectivity via USB
⢠Bus-powered
Operating Systems
⢠Windows Vista/XP/2000
Recommended Software
⢠LabVIEW
⢠LabWindowsâ¢/CVI
⢠Measurement Studio
Measurement Services
Software (included)
⢠NI-DAQmx driver software
⢠LabVIEW SignalExpress LE
Product
Signal Type Channels (DI) Input Resolution (bits) Sampling Rate (kS/s/ch)
USB-9215A
Voltage
4
16
100
1For up-to-date information on NI-DAQ, visit ni.com/support/daq/versions.htm.
Input Range (V)
Connector Operating System Driver Software1
±10
Screw Terminal, BNC Windows
NI-DAQmx
Table 1. Portable USB DAQ for Simultaneous Sampling Selection Guide
Overview
The National Instruments USB-9215A is a data acquisition module with
integrated signal conditioning that provides plug-and-play connectivity
via USB for faster setup and measurements. It offers four channels of
simultaneously sampled voltage inputs with 16-bit accuracy to deliver
minimal phase delay when scanning multiple channels. In addition, this
module includes 250 Vrms channel-to-earth ground isolation for safety,
noise immunity, and high common-mode voltage range.
Software
The NI USB-9215A uses NI-DAQmx high-performance, multithreaded
driver software for interactive configuration and data acquisition on
Windows OSs. All NI data acquisition devices shipped with NI-DAQmx
also include NI LabVIEW SignalExpress LE configuration-based
data-logging software.
Common Applications
The USB-9215A is ideal for a number of applications where small size
and portability are essential, such as:
⢠Portable data logging â log temperature data quickly and easily
⢠Academic lab use â obtain academic discounts for quantities
of five or more (visit ni.com/academic for details)
⢠Environmental monitoring â monitor environmental conditions
such as humidity or light
⢠Embedded OEM applications
⢠In-vehicle data acquisition
Information for OEM Customers
For information on special configurations and pricing,
visit ni.com/oem.
Recommended Accessories
The USB-9215A has built-in screw-terminal connectivity, so no additional
accessories are required. It is also available with BNC connectors.
Ordering Information
NI USB-9215A (Windows)
Screw terminals ................................................................779434-01
BNC connectors ................................................................779435-01
BUY NOW!
For complete product specifications, pricing, and accessory
information, call 800 813 3693 (U.S.) or go to ni.com/oem.
|
▷ |