|
TBX-1316 Datasheet, PDF (1/3 Pages) National Instruments Corporation – SCXI High-Voltage Attenuator Terminal Block | |||
|
SCXI High-Voltage Attenuator Terminal Block
NI TBX-1316
⢠Cabled terminal block for:
⢠SCXI-1125 (recommended)
⢠SCXI-1120/D
⢠SCXI-1126
⢠Input voltage range
⢠1,000 V Cat I
⢠600 V Cat II
⢠200:1 attenuation (fixed)
⢠8 differential input channels
⢠Lockable shielded metal enclosure
⢠Screw-terminal signal connectivity
⢠Secure strain-relief wire collars
⢠Flanges for panel mounting
Operating Systems
⢠Windows 2000/NT/XP
Recommended Software
⢠LabVIEW
⢠LabWindows/CVI
⢠Measurement Studio
Other Compatible Software
⢠Visual Basic, C, C++
Measurement Services
Software
⢠NI-DAQmx Driver Software
Overview
The National Instruments TBX-1316 is a high-voltage attenuator
terminal block for the SCXI-1125, SCXI-1120/D, and SCXI-1126
analog input modules. The NI TBX-1316 extends the input voltage
range for AC/DC signals to 1,000 V for Category I installations and
600 V for Category II installations. For voltage measurements, the
TBX-1316 is recommended for use with the SCXI-1125, but can also
be used with the SCXI-1120/D. For frequency measurements, you
can use the TBX-1316 with the SCXI-1126.
Features
The TBX-1316 provides 200:1 attenuation for eight differential input
channels. Screw terminals provide connectivity for primary, neutral,
and ground connections. Additionally, wire strain-relief collars secure
cables in place. A rigid metal enclosure ensures safety and proper
grounding and also assists in easy panel-mount installation. The
TBX-1316 contains calibration EEPROMs, which when used with the
SCXI-1125, provide calibration information specific to each input
channel. The SH3232 shielded cable should be used to connect the
TBX-1316 to the analog input module.
Measurement Services Software
NI-DAQmx is the robust driver software included with all
National Instruments data acquisition and signal conditioning
products. This easy-to-use software tightly integrates the full
functionality of your DAQ hardware to NI LabVIEW,
LabWindows/CVI, and Measurement Studio for Visual Basic.
High-performance features include multidevice synchronization,
networked measurements, and DMA data management. Bundled
with NI-DAQmx, Measurement & Automation Explorer (MAX)
simplifies measurement hardware configuration with device test panels,
interactive measurements, and scaled I/O channels. NI-DAQmx also
provides numerous example programs for LabVIEW and other
application development environments to get you started with your
application quickly.
Ordering Information
NI TBX-1316 ................................................................777207-16
BUY NOW!
For complete product specifications, pricing, and accessory
information, call (800) 813 3693 (U.S. only)
or go to ni.com/signalconditioning.
|
▷ |