PXI-5124 Datasheet, PDF (1/3 Pages) National Instruments Corporation – 150 MHz, 200 MS/s, 12-Bit Digitizer

150 MHz, 200 MS/s, 12-Bit Digitizer
NI PXI-5124
• 2 channels simultaneously sampled
at 12-bit resolution
• 200 MS/s real-time and 4.0 GS/s
random interleaved sampling
• 150 MHz bandwidth
• 200 mV to 20 V input range
• >75 dBc SFDR
• 8, 32, 256, or 512 MB of memory
per channel
• Edge, window, hysteresis, video,
and digital triggering with
50 ps timestamping
Operating Systems
• Windows 2000/NT/XP
Recommended Software
• LabVIEW
• LabWindows/CVI
• Measurement Studio
Driver Software (included)
• NI-SCOPE driver
• LabVIEW Express VIs
• SCOPE Soft Front Panel
• NI Spectral Measurements Toolkit
(with 32, 256 and 512 MB models)
Calibration
• Gain, offset, frequency response
and timing self-calibration
• 2 year external calibration cycle
Overview
The National Instruments PXI-5124 high-resolution digitizer
features two 200 MS/s simultaneously sampled inputs channels with
12-bit resolution, 150 MHz bandwidth, and up to 512 MB of
memory per channel in a compact 3U PXI module. The NI PXI-5124
uses the high-speed PCI bus and the scatter-gather bus mastering of
the NI MITE ASIC to move data to the computer at speeds up to 100
times faster than traditional instrument interfaces, thereby
dramatically decreasing overall test time. With the Synchronization
and Memory Core (SMC) architecture of the PXI-5124, you can
create mixed-signal systems using signal generators and digital
waveform generator/analyzers or build a high-channel-count
digitizer with subnanosecond synchronization between channels.
Dual 200 MS/s, 12-Bit Input Channels
for Time and Frequency Analysis
• 150 MHz input bandwidth with anti-alias and noise filters
• >75 dBc spurious free dynamic range (SFDR)
• 4.0 GS/s equivalent time sampling for repetitive signals
• Independent channel selectable 200 mV_pp to 20 V_pp input ranges
• Independent channel selectable 50 Ω or 1 MΩ input impedance
• 2-year calibration cycle and 0 to 55 ˚C operating temperature
Deep Onboard Memory
• 8, 32, 256, or 512 MB of memory per channel
• Capture more than 1 million triggered waveforms with multiple
record hardware rearm
• Stream data continuously from onboard memory to host memory
or disk
Triggering, Clocking, and Synchronization
• Edge, window, hysteresis, video, digital, triggering with
50 ps timestamping
• Pre and posttrigger acquisition in single and multiple-record mode
• Internal 200 MHz clock or external clock from 50 to 210 MHz
• Phase lock to PXI 10 MHz reference or external reference from
1 to 20 MHz
Software
• IVI-compliant NI-SCOPE driver for
LabVIEW, LabWindows/CVI, and
Microsoft C++ and Visual Basic with
more than 50 built-in measurements
• SCOPE Soft Front Panel
for interactive control
• Spectral Measurements Toolkit
for sophisticated frequency-domain
measurements in communications,
signal intelligence, and
avionics applications
Applications
Communications
xDSL
Wireless communications
Baseband I & Q
Consumer Electronics
DVD, DVD-R, and PVR
Set top box
Gaming console
Biomedical and Scientific Research
Ultrasonic medical imaging
Mass spectrometry
Particle physics
Aerospace/Defense
Emulation of IC communications
Consumer Electronics
RADAR, SONAR, and LIDAR
Satellite
Signal intelligence
Ordering Information
NI PXI-5124 ..............................................................778757-0M¹
Includes NI-SCOPE driver and SCOPE Soft Front Panel. 32, 256, and 512 MB
models include NI Spectral Measurements Toolkit.
1_{M (memory per channel): 1 (8 MB), 2 (32 MB), (256 MB), 4 (512 MB)}
Recommended PXI Switch
NI PXI-2593 ..................................................................778793-01