NHD-0216SZ-FSPG-GBW Datasheet, PDF (12/12 Pages) Newhaven Display International, Inc. – Character Liquid Crystal Display Module

Quality Information
Test Item
Content of Test
High Temperature storage
Endurance test applying the high
storage temperature for a long time.
Low Temperature storage Endurance test applying the low storage
temperature for a long time.
High Temperature
Operation
Endurance test applying the electric stress
(voltage & current) and the high thermal
stress for a long time.
Low Temperature
Operation
Endurance test applying the electric stress
(voltage & current) and the low thermal
stress for a long time.
High Temperature /
Endurance test applying the electric stress
Humidity Operation
(voltage & current) and the high thermal
with high humidity stress for a long time.
Thermal Shock resistance
Endurance test applying the electric stress
(voltage & current) during a cycle of low
and high thermal stress.
Vibration test
Endurance test applying vibration to
simulate transportation and use.
Static electricity test
Endurance test applying electric static
discharge.
Note 1: No condensation to be observed.
Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH.
Note 3: Test performed on product itself, not inside a container.
Test Condition
+80⁰C , 48hrs
‐30⁰C , 48hrs
+70⁰C 48hrs
‐20⁰C , 48hrs
+40⁰C , 90% RH , 48hrs
0⁰C,30min ‐> 25⁰C,5min ‐>
50⁰C,30min = 1 cycle
10 cycles
10‐55Hz , 15mm amplitude.
60 sec in each of 3 directions
X,Y,Z
For 15 minutes
VS=800V, RS=1.5kΩ, CS=100pF
One time
Note
2
1,2
2
1,2
1,2
3
Precautions for using LCDs/LCMs
See Precautions at www.newhavendisplay.com/specs/precautions.pdf
Warranty Information and Terms & Conditions
http://www.newhavendisplay.com/index.php?main_page=terms
[12]