D2500D Datasheet, PDF (2/5 Pages) Nell Semiconductor Co., Ltd – High voltage ratings up to 2500V

SEMICONDUCTOR
D2500D Series RRooHHSS
Nell High Power Products
FORWARD CONDUCTION
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES UNIT
Maximum average forward current
at heatsink temperature
I_F(AV) ^{180° conduction, half sine wave}
Double side (single side) cooled
2500(1300) A
55(85)
ºC
Maximum RMS forward current
I_F(RMS) 25°C heatsink temperature double side cooled
4300
A
Maximum peak, one cycle
non-reptitive surge current
Maximum l²t for fusing
I_FSM
I²t
t = 10ms
t = 8.3ms
t = 10ms
t = 8.3ms
t = 10ms
t = 8.3ms
t = 10ms
t = 8.3ms
No voltage
reapplied
100%V_RRM
reapplied
No voltage
reapplied
100%V_RRM
reapplied
Sinusoidal half wave,
initial T_J = T_J maximum
26000
27200
21800
22850
3380
3070
2380
2170
A
kA²s
Maximum l²√t for fusing
I²âˆšt ^{t = 0.1 to 10 ms, no voltage reapplied}
33800 kA²âˆšs
Low level value of threshold voltage
High level value of threshold voltage
V_F(TO)1 (16.7% x π x l_F(AV) < I < π x l_F(AV)),T_J =T_J maximum
0.83
V
V_F(TO)2 (I > π x l_F(AV)),T_J =T_J maximum
1.00
Low level value of forward slope resistance
r_t1
(16.7% x π x l_F(AV) < I < π x l_F(AV)),T_J =T_J maximum
0.19
mΩ
High level value of forward slope resistance
r_t2
(I > π x l_F(AV)),T_J =T_J maximum
0.17
Maximum forward voltage drop
V_FM
l_pk = 4000A,T_J =T_J maximum_,
t_p = 10 ms sinusoidal wave
1.55
V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
Maximum junction operating temperature range
T_J
Maximum storage temperature range
T_stg
Maximum thermal resistance, junction to heatsink
R_thJ-hs
TEST CONDITIONS
DC operation single side cooled
DC operation double side cooled
VALUES
-40 to 175
-55 to 200
0.042
0.020
UNIT
ºC
K/W
Mounting force, ±10%
22250
N
(2250)
(kg)
Approximate weight
Case style
425
g
TO-200AC (K-PUK), Nell’s D-type Capsule
RthJC CONDUCTION
SINUSOIDAL CONDUCTION
CONDUCTION ANGEL
SINGLE SIDE DOUBLE SIDE
RECTANGULAR CONDUCTION
SINGLE SIDE DOUBLE SIDE
TEST CONDUCTIONS
180°
120°
90°
60°
30°
0.002
0.002
0.003
0.004
0.007
0.002
0.002
0.003
0.004
0.007
0.001
0.002
0.003
0.004
0.007
0.001
0.002
0.003
0.004
0.007
T_J = T_J maximum
Note
• The table above shows the increment of thermal resistance R_thJ-hs when devices operate at different conduction angles than DC
UNITS
K/W
www.nellsemi.com
Page 2 of 5