D1400C Datasheet, PDF (2/5 Pages) Nell Semiconductor Co., Ltd – Standard Recovery Diodes

SEMICONDUCTOR
D1400C Series RRooHHSS
Nell High Power Products
FORWARD CONDUCTION
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES UNIT
Maximum average forward current
at heatsink temperature
I_F(AV) ^{180° conduction, half sine wave}
Double side (single side) cooled
1400(795) A
55 (85) _ºC
Maximum RMS forward current
I_F(RMS) 25°C heatsink temperature double side cooled
2600
A
Maximum peak, one cycle
non-reptitive surge current
Maximum l²t for fusing
I_FSM
I²t
t = 10ms
t = 8.3ms
t = 10ms
t = 8.3ms
t = 10ms
t = 8.3ms
t = 10ms
t = 8.3ms
No voltage
reapplied
100%V_RRM
reapplied
No voltage
reapplied
100%V_RRM
reapplied
Sinusoidal half wave,
initial T_J = T_J maximum
10600
11100
8940
9375
562
511
400
365
A
kA²s
Maximum l²√t for fusing
I²âˆšt ^{t = 0.1 to 10 ms, no voltage reapplied}
5618 kA²âˆšs
Low level value of threshold voltage
High level value of threshold voltage
V_F(TO)1 (16.7% x π x l_F(AV) < I < π x l_F(AV)),T_J =T_J maximum
0.84
V
V_F(TO)2 (I > π x l_F(AV)), T_J =T_J maximum
0.88
Low level value of forward slope resistance
r_t1
(16.7% x π x l_F(AV) < I < π x l_F(AV)), T_J =T_J maximum
0.40
mΩ
High level value of forward slope resistance
r_t2
(I > π x l_F(AV)), T_J =T_J maximum
0.38
Maximum forward voltage drop
V_FM
l_pk = 1500A, T_J =T_J maximum_,
t_p = 10 ms sinusoidal wave
1.44
V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
Maximum junction operating temperature range
T_J
Maximum storage temperature range
T_stg
Maximum thermal resistance, junction to heatsink
R_thJ-hs
TEST CONDITIONS
DC operation single side cooled
DC operation double side cooled
VALUES
-40 to 150
-40 to 200
0.076
0.038
UNIT
ºC
K/W
Mounting force, ±10%
9800
N
(1000)
(kg)
Approximate weight
Case style
250
g
TO-200AB (B-PUK), Nell’s C-type Capsule
RthJC CONDUCTION
SINUSOIDAL CONDUCTION
CONDUCTION ANGEL
SINGLE SIDE DOUBLE SIDE
RECTANGULAR CONDUCTION
SINGLE SIDE DOUBLE SIDE
TEST CONDUCTIONS
180°
120°
90°
60°
30°
0.007
0.008
0.010
0.015
0.026
0.007
0.008
0.010
0.015
0.026
0.005
0.008
0.011
0.016
0.026
0.005
0.008
0.011
0.016
0.026
T_J = T_J maximum
Note
• The table above shows the increment of thermal resistance R_thJ-hs when devices operate at different conduction angles than DC
UNITS
K/W
www.nellsemi.com
Page 2 of 5