N-HFA08TB120 Datasheet, PDF (1/6 Pages) Nell Semiconductor Co., Ltd – FRED Ultrafast Soft Recovery Diode, 8 A

SEMICONDUCTOR
N-HFA08TB120 RRooHHSS
Nell High Power Products
FRED
FEATURES
Ultrafast Soft Recovery Diode, 8 A
Ultrafast recovery
Ultrasoft recovery
Very low I_RRM
Very low Q _rr
Specified at operating conditions
Lead (Pb)-free
Designed and qualified for industrial level
BENEFITS
Reduced RFI and EMI
Reduced power loss in diode and switching transistor
Higher frequency operation
Reduced snubbing
Reduced parts count
DESCRIPTION
cathode
2
Available
RoHS*
COMPLIANT
HFA08TB120 is a state of the art ultrafast recovery
diode. Employing the latest in epitaxial construction
and advanced processing techniques it features
a superb combination of characteristics which result
in performance which is unsurpassed by any rectifier
previously available. With basic ratings of 1200V
and 8 A continuous current, the HFA08TB120 is
especially well suited for use as the companion
diode for IGBTs and MOSFETs. In addition to ultrafast
recovery time, the FRED product line features
extremely low values of peak recovery current (IRRM)
and does not exhibit any tendency to “snap-off” during
the tb portion of recovery. The FRED features combine
to offer designers a rectifier with lower noise and
significantly lower switching losses in both the diode
and the switching transistor. These FRED advantages
can help to significantly reduce snubbing, component
count and heatsink sizes. The FRED HFA08TB120
is ideally suited for applications in power supplies and
conversion systems (such as inverters), motor drives,
and many other similar applications where high speed,
high efficiency is needed.
1
3
Cathode Anode
TO-220AC
PRODUCT SUMMARY
V_R
V_F at 8A at 25 ºC
I_F(AV)
t_rr (typical)
T_J (maximum)
Q_rr (typical)
dI_(rec)M/dt (typical) at 125 ºC
I_RRM (typical)
1200 V
3.3 V
8A
30 ns
150 ºC
140 nC
85 A/µS
4.5 A
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Cathode to anode voltage
Maximum continuous forward current
Single pulse forward current
Maximum repetitive forward current
Maximum power dissipation
SYMBOL
V_R
I_F
I_FSM
I_FRM
P_D
Operating junction and storage temperature range TJ, TStg
TEST CONDITIONS
Tc = 100 ºC
Tc = 25 ºC
Tc = 100 ºC
VALUES
1200
8
130
32
73
29
- 55 to + 150
UNITS
V
A
W
°C
www.nellsemi.com
Page 1 of 6