SD-X2D00 Datasheet, PDF (2/3 Pages) Nel Frequency Controls,inc – LVDS

CRYSTAL CLOCK OSCILLATORS
Data Sheet 0208F
SD-X2D00 Series Continued
LVDS
Operating Conditions and Output Characteristics
Rev. W
Electrical Characteristics
Parameter ⁽⁷⁾
Symbol
Conditions
Frequency
-----
-----
Duty Cycle⁽²⁾
-----
Differential Output Voltage⁽²⁾V_OD
Differential Output Error⁽²⁾ ΔV_OD
Offset Voltage⁽²⁾
V_OS
Offset Error⁽²⁾
ΔV_OS
Disable Voltage
-----
Enable Voltage⁽⁵⁾
-----
Rise & Fall Time ⁽²⁾
tr,tf
Tpd ⁽⁴⁾
-----
@ V_O /2
-----
-----
-----
-----
V_EE=0V
V_EE=0V
20-80%V_O
-----
Jitter, Integrated
J
Integrated from phase noise,
12kHz to 20MHz, RMS
Jitter, Wavecrest
Characterized ⁽³⁾ ----- Random Period
Accum, pk-to-pk
Phase Noise ⁽⁶⁾
£(Δf) 200MHz
@ 10Hz
@100Hz
@1kHz
@10kHz
@100kHz
@ >1Mhz
Frequency Stability ⁽¹⁾
dF/F Overall conditions including:
voltage, calibration, temp.,
10 yr aging, shock, vibration
Min
80.0MHz
45/55%
247mV
-----
1.125V
-----
-----
0.7V_CC
-----
-0.5 ns
-----
-----
-----
-----
-----
-----
-----
-----
-----
-100ppm
Typical
-----
-----
330mV
-----
1.25V
-----
-----
-----
0.8 ns
-----
0.1 ps
Max
312.5MHz
55/45%
454mV
50mV
1.375V
50mV
0.3V_CC
-----
1.0 ns
+0.5 ns
-----
2.3ps
28ps
-65 dBc/Hz
-100 dBc/Hz
-130 dBc/Hz
-143 dBc/Hz
-143 dBc/Hz
-145 dBc/Hz
-----
-----
-----
-----
-----
-----
-----
-----
-----
+100ppm
General Characteristics
Parameter
Symbol
Conditions
Supply Voltage
V_CC
Code A:3.3V±5%
Code B:2.5V±5%
Supply Current
I_CC
Output current
I_O
Operating temperature T_A
Storage temperature
T_S
Power Dissipation
P_D
-----
Continuous Output Current
------
-----
3.3V
2.5V
Load
100 ohms across differential outputs
Start-up time
t_S
-----
Min
3.135V
2.375V
0.0 mA
0.0 mA
0°C
-55°C
-----
-----
-----
Typical
3.3V
2.5V
-----
-----
-----
-----
-----
-----
2 ms
Environmental and Mechanical Characteristics
Mechanical Shock
Per MIL-STD-202, Method 213, Condition E
Thermal Shock
Per MIL-STD-883, Method 1011, Condition A
Vibration
0.060" double amplitude 10 Hz to 55 Hz, 35g’s 55Hz to 2000 Hz
Hermetic Seal
Leak rate less than 1 x 10 ^-8 atm.cc/sec of helium
Max
3.465V
2.625V
80 mA
±50.0 mA
70°C
125°C
277 mW
210 mW
10 ms
Footnotes:
1) Standard frequency stability (±20,±25,±50ppm & others available)
2) With Load of 100 ohms across differential outputs.
3) Jitter performance is frequency dependent. Please contact
factory for full Wavecrest characterization.
4) Tpd is phase shift between the falling edge of pin 4 and the
rising edge of pin 5.
5) Open to enable pin also enables the output.
6) If phase noise data at a particular frequency is needed,
contact factory.
7) All parameters are specified for normal conditions (25°C,
Package Code
SD 6 Pad 5x7 SMD
Vcc, Load, etc.), unless specified otherwise.
Input Voltage
Code Specification
A 3.3V
B 2.5V
Creating a Part Number
SD - X2D0X - FREQ
Tolerance/Performance
0 ±100ppm 0-70°C
1 ±50ppm 0-70°C
7 ±25ppm 0-70°C
9 Customer Specific
A ±20ppm 0-70°C
B ±50ppm -40 to +85°C
C ±100ppm -40 to +85°C
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone [phone] FAX [phone]
Email: [e-mail] www.nelfc.com