PJ-B2D00_10 Datasheet, PDF (2/3 Pages) Nel Frequency Controls,inc – LVDS

CRYSTAL CLOCK OSCILLATORS
Data Sheet 0439B
PJ-B2D00 Series Continued
LVDS
Operating Conditions and Output Characteristics
Rev. G
Electrical Characteristics
Parameter
Frequency
Duty Cycle⁽²⁾
Logic 0 ⁽²⁾
Logic 1 ⁽²⁾
Differential Voltage ⁽²⁾
Disable Voltage
Enable Voltage⁽⁵⁾
Rise & Fall Time ⁽²⁾
Tpd ⁽⁴⁾
Jitter, Integrated
Jitter, Wavecrest
Characterized ⁽³⁾
Phase Noise
Frequency Stability ⁽¹⁾
Symbol
Conditions
-----
-----
-----
@ V_O /2
V_OL
-----
V_OH
-----
V_OD
-----
-----
V_EE=0V
-----
V_EE-0V
tr,tf
20-80%V_O
-----
-----
J
Integrated from phase noise,
12kHz to 20MHz, RMS
-----
£(Δf)
dF/F
Random Period
Accum, pk-to-pk
200MHz
@ 10Hz
@100Hz
@1kHz
@10kHz
@100kHz
@ >1Mhz
Overall conditions including:
voltage, calibration, temp.,
10 yr aging, shock, vibration
Min
80.0MHz
45/55%
0.80V
1.25V
250 mV
-----
2.0V
-----
-0.5 ns
-----
-----
-----
-----
-----
-----
-----
-----
-----
-100ppm
Typical
-----
-----
-----
-----
-----
-----
-----
0.8 ns
-----
0.1 ps
Max
312.5MHz
55/45%
1.10V
1.55V
450 mV
0.8V
V_CC
1.0 ns
+0.5 ns
-----
2.3ps
28ps
-65 dBc/Hz
-100 dBc/Hz
-130 dBc/Hz
-143 dBc/Hz
-143 dBc/Hz
-145 dBc/Hz
-----
-----
-----
-----
-----
-----
-----
-----
-----
+100ppm
General Characteristics
Parameter
Supply Voltage
Supply Current
Output current
Operating temperature
Storage temperature
Power Dissipation
Load
Start-up time
Symbol
Conditions
V_CC
-----
I_CC
-----
I_O
Continuous Output Current
T_A
------
T_S
-----
P_D
-----
100 ohms across differential outputs
t_S
-----
Environmental and Mechanical Characteristics
Min
2.375V
0.0 mA
0.0 mA
0°C
-55°C
-----
-----
Typical
2.5V
-----
-----
-----
-----
-----
2 ms
Max
2.625V
80 mA
±50.0 mA
70°C
125°C
210 mW
10 ms
Mechanical Shock
Thermal Shock
Vibration
Hermetic Seal
Per MIL-STD-202, Method 213, Condition E
Per MIL-STD-883, Method 1011, Condition A
0.060" double amplitude 10 Hz to 55 Hz, 35g’s 55Hz to 2000 Hz
Leak rate less than 1 x 10 ^-8 atm.cc/sec of helium
Footnotes:
1) Standard frequency stability (±20,±25,±50ppm &
others available)
2) With Load of 100 ohms across differential outputs.
3) Jitter performance is frequency dependent. Please
contact factory for full Wavecrest characterization.
4) Tpd is phase shift between the falling edge of pin 4
and the rising edge of pin 5.
5) Open to enable pin also enables the output
Package Code
PJ 6 J Lead SMD
Input Voltage
Code Specification
A 3.3V
B 2.5V
Creating a Part Number
PJ - B2D0X - FREQ
Tolerance/Performance
0 ±100ppm 0-70°C
1 ±50ppm 0-70°C
7 ±25ppm 0-70°C
9 Customer Specific
A ±20ppm 0-70°C
B ±50ppm -40 to +85°C
C ±100ppm -40 to +85°C
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone [phone] FAX [phone]
Email: [e-mail] www.nelfc.com