PJ-A2D00_10 Datasheet, PDF (2/3 Pages) Nel Frequency Controls,inc – LVDS

CRYSTAL CLOCK OSCILLATORS
Data Sheet 0208E
PJ-A2D00 Series Continued
LVDS
Operating Conditions and Output Characteristics
Rev. M
Electrical Characteristics
Parameter
Frequency
Duty Cycle⁽²⁾
Logic 0 ⁽²⁾
Logic 1 ⁽²⁾
Differential Voltage ⁽²⁾
Disable Voltage
Enable Voltage⁽⁵⁾
Rise & Fall Time ⁽²⁾
Tpd ⁽⁴⁾
Jitter, Integrated
Jitter, Wavecrest
Characterized ⁽³⁾
Phase Noise
Frequency Stability ⁽¹⁾
Symbol
Conditions
-----
-----
-----
@ V_O /2
V_OL
-----
V_OH
-----
V_OD
-----
-----
V_EE=0V
-----
V_EE=0V
tr,tf
20-80%V_O
-----
-----
J
Integrated from phase noise,
12kHz to 20MHz, RMS
-----
£(Δf)
dF/F
Random Period
Accum, pk-to-pk
200MHz
@ 10Hz
@100Hz
@1kHz
@10kHz
@100kHz
@ >1Mhz
Overall conditions including:
voltage, calibration, temp.,
10 yr aging, shock, vibration
Min
80.0MHz
45/55%
0.80V
1.25V
250 mV
-----
2.0V
-----
-0.5 ns
-----
-----
-----
-----
-----
-----
-----
-----
-----
-100ppm
Typical
-----
-----
-----
-----
-----
-----
-----
0.8 ns
-----
0.1 ps
Max
312.5MHz
55/45%
1.10V
1.55V
450 mV
0.8V
-----
1.0 ns
+0.5 ns
-----
2.3ps
28ps
-65 dBc/Hz
-100 dBc/Hz
-130 dBc/Hz
-143 dBc/Hz
-143 dBc/Hz
-145 dBc/Hz
-----
-----
-----
-----
-----
-----
-----
-----
-----
+100ppm
General Characteristics
Parameter
Supply Voltage
Supply Current
Output current
Operating temperature
Storage temperature
Power Dissipation
Load
Start-up time
Symbol
Conditions
V_CC
-----
I_CC
-----
I_O
Continuous Output Current
T_A
------
T_S
-----
P_D
-----
100 ohms across differential outputs
t_S
-----
Environmental and Mechanical Characteristics
Min
3.135V
0.0 mA
0.0 mA
0°C
-55°C
-----
-----
Typical
3.3V
-----
-----
-----
-----
-----
2 ms
Max
3.465V
80 mA
±50.0 mA
70°C
125°C
277 mW
10 ms
Mechanical Shock
Thermal Shock
Vibration
Hermetic Seal
Per MIL-STD-202, Method 213, Condition E
Per MIL-STD-883, Method 1011, Condition A
0.060" double amplitude 10 Hz to 55 Hz, 35g’s 55Hz to 2000 Hz
Leak rate less than 1 x 10 ^-8 atm.cc/sec of helium
Footnotes:
1) Standard frequency stability (±20,±25,±50ppm &
others available)
2) With Load of 100 ohms across differential outputs.
3) Jitter performance is frequency dependent. Please
contact factory for full Wavecrest characterization.
) Tpd is phase shift between the falling edge of pin 4 and
the rising edge of pin 5.
5) Open to enable pin also enables the output
Package Code
PJ 6 J Lead SMD
Input Voltage
Code Specification
A 3.3V
B 2. 5V
5V
Creating a Part Number
PJ - A2D0X - FREQ
Tolerance/Performance
0 ±100ppm 0-70°C
1 ±50ppm 0-70°C
7 ±25ppm 0-70°C
9 Customer Specific
A ±20ppm 0-70°C
B ±50ppm -40 to +85°C
C ±100ppm -40 to +85°C
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone [phone] FAX [phone]
Email: [e-mail] www.nelfc.com