SR-A2D30_11 Datasheet, PDF (1/3 Pages) Nel Frequency Controls,inc – LVDS

CRYSTAL CLOCK OSCILLATORS
LVDS
SR-A2D30 Series
Data Sheet 0547A
Rev. H
Description
The SR-A2D30 Series of quartz crystal oscillators provides a LVDS compatible signal. This device uses
multiple ground pins for improved signal integrity.
Features
• Wide frequency range - 250.0MHz to 750.0MHz
• Low noise analog multiplication
• High frequency output eliminates the need for PLL
multiplication
• Stabilities over temperatures as low as ±20ppm
eliminates SAW oscillator temperature problems
• 3.3V and 2.5V version available
• High Reliability - NEL HALT/HASS qualified for
crystal oscillator start-up conditions
• User specified tolerance available
• Cover connected to ground
• High shock resistance, to 1000g
• COTS/Dual use
Electrical Connection
Pin Connection
1 V_CC
2 Ground
3 NC or Ground
4 Q Output
5 /Q Output
6 Ground
7 Ground
8 Enable
NEL recommends connecting the large
pad located between the general signal
pads to ground for heat transfer and
improved RF grounding.
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone [phone] FAX [phone]
Email: [e-mail] www.nelfc.com