English
Language : 

UPG2404T6Q Datasheet, PDF (4/9 Pages) NEC – L-BAND SP3T SWITCH
EVALUATION CIRCUIT
RF1
C1
RF2
C1
Vcont2
C2
RF3
C1
μPG2404T6Q
(Top View)
1
10
2
9
3
8
4
7
5
6
C2
C1
C2
Vcont1
ANT
Vcont3
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
USING THE NEC EVALUATION BOARD
Symbol
C1
C2
Values
56 pF
1 000 pF
APPLICATION INFORMATION
CB
Switch
LESD
CB
CB
• CB are DC blocking capacitors external to the device.
A value of 56 pF is sufficient for operation from 500 MHz to 2.5 GHz bands.
The value may be tailored to provide specific electrical responses.
• The RF ground connections should be kept as short as possible and connected to directly to a good RF ground
for best performance.
• LESD provides a means to increase the ESD protection on a specific RF port, typically the port attached to the
antenna.
4
Data Sheet PG10726EJ01V0DS