UPG2151TK Datasheet, PDF (3/12 Pages) NEC – L, S-BAND SPDT SWITCH

μPG2151TK
ELECTRICAL CHARACTERISTICS
(TA = +25°C, Vcont (H) = 2.6 V, Vcont (L) = 0 V, DC cut capacitors = 56 pF, unless otherwise specified)
Parameter
Insertion Loss 1
Insertion Loss 2
Insertion Loss 3
Isolation 1
Isolation 2
Isolation 3
Input Return Loss
Output Return Loss
0.1 dB Loss Compression
Input Power ^Note
Switch Control Current
Switch Control Speed
Symbol
Test Conditions
LINS1 f = 0.5 to 1.0 GHz
LINS2 f = 1.0 to 2.0 GHz
LINS3 f = 2.0 to 3.0 GHz
ISL1 f = 0.5 to 1.0 GHz
ISL2 f = 1.0 to 2.0 GHz
ISL3 f = 2.0 to 3.0 GHz
RLin f = 0.5 to 3.0 GHz
RLout f = 0.5 to 3.0 GHz
Pin (0.1 dB) f = 2.0 GHz
Icont
tSW 50% CTL to 90/10% RF
MIN.
−
−
−
22
15
10
−
−
+18.0
TYP.
0.30
0.35
0.50
25
18
13
20
20
+21.0
MAX.
0.42
0.47
0.65
−
−
−
−
−
−
Unit
dB
dB
dB
dB
dBm
−
0.2
20
μA
−
1.0
−
μs
Note Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of linear
range.
Caution This device is used it is necessary to use DC cut capacitors.
The value of DC cut capacitors should be chosen to accommodate the frequency of operation,
bandwidth, switching speed and the condition with actual board of your system. The range of
recommended DC cut capacitor value is less than 100 pF.
Data Sheet PG10600EJ01V0DS
3