UPG2030TB Datasheet, PDF (3/9 Pages) NEC – NECs 1W L, S-BAND SPDT SWITCH

UPG2030TB
ELECTRICAL CHARACTERISTICS
(TA = +25°C, Vcont = 2.8 V/0 V, DC blocking capacitors = 56 pF, unless otherwise specified)
Parameter
Insertion Loss 1
Insertion Loss 2
Insertion Loss 3
Isolation 1
Isolation 2
Input Return Loss
Output Return Loss
0.1 dB Gain Compression
Input Power ^Note
Symbol
Test Conditions
LINS1 f = 0.5 to 1.0 GHz
LINS2 f = 1.0 to 2.0 GHz
LINS3 f = 2.0 to 2.5 GHz
ISL1 f = 0.5 to 2.0 GHz
ISL2 f = 2.0 to 2.5 GHz
RLin f = 0.5 to 2.5 GHz
RLout f = 0.5 to 2.5 GHz
Pin (0.1 dB) f = 2.0 GHz
f = 2.5 GHz
MIN.
−
−
−
23
20
15
15
+25.5
+25.5
TYP.
0.25
0.30
0.35
27
24
20
20
+27.0
+27.0
Switch Control Current
Switch Control Speed
Icont No signal
tSW
−
4
−
50
MAX.
0.45
0.50
0.55
−
−
−
−
−
−
20
500
Unit
dB
dB
dB
dB
dB
dB
dB
dBm
dBm
µA
ns
Note Pin (0.1 dB) is the measured input power level when the insertion loss increases 0.1 dB more than that of linear
range.
STANDARD CHARACTERISTICS FOR REFERENCE
(TA = +25°C, Vcont = 3.0 V/0 V, DC blocking capacitors = 51 pF, unless otherwise specified)
Parameter
1 dB Gain Compression
Input Power ^Note
Symbol
Test Conditions
Pin (1 dB) f = 2.0 GHz
MIN.
−
TYP.
+30.0
MAX.
−
Unit
dBm
Note Pin (1 dB) is the measured input power level when the insertion loss increases 1 dB more than that of linear
range.
Caution
It is necessary to use DC blocking capacitors with the device.
The value of DC blocking capacitors should be chosen to accommodate the frequency of operation,
bandwidth, switching speed and the condition with actual board of your system. The range of recommended
DC blocking capacitor value is less than 100 pF.