UPG2012TK Datasheet, PDF (3/7 Pages) NEC – NECs ¼ W SINGLE CONTROL L, S-BAND SPDT SWITCH

UPG2012TK
ELECTRICAL CHARACTERISTICS
(TA = +25°C, VDD = 2.8 V, Vcont = 2.8 V/0 V, DC blocking capacitors = 56 pF, unless otherwise specified)
Parameter
Insertion Loss1
Insertion Loss2
Isolation1
Input Return Loss
Output Return Loss
0.1 dB Gain Compression
Input Power ^Note
Supply Current
Switching Control Current
Symbol
Test Conditions
LINS1
LINS2
ISL1
RLin
RLout
f = 0.5 to 1.0 GHz
f = 2.0 GHz
f = 0.5 to 2.0 GHz
f = 0.5 to 2.5 GHz
f = 0.5 to 2.5 GHz
Pin(0.1 dB) f = 2.0 GHz
IDD
Icont
MIN.
−
−
24
15
15
+17.5
−
−
TYP.
0.27
0.30
30
20
20
+20.5
50
4
MAX.
0.50
0.50
−
−
−
−
100
20
Unit
dB
dB
dB
dB
dB
dBm
μA
μA
Note Pin (0.1 dB) is the measured input power level when the insertion loss increases 0.1 dB more than that of linear
range.
STANDARD CHARACTERISTICS FOR REFERENCE
(TA = +25°C, VDD = 2.8 V,Vcont = 2.8 V/0 V, DC blocking capacitors = 56 pF, unless otherwise specified)
Parameter
Insertion Loss3
Isolation2
1 dB Gain Compression
Input Power ^Note
Switching Control Speed
Symbol
Test Conditions
LINS3
ISL2
f = 2.5 GHz
f = 2.5 GHz
Pin(1 dB) f = 2.0 GHz
tSW
MIN.
−
−
−
−
TYP.
0.30
30
+24.0
300
MAX.
−
−
−
−
Unit
dB
dB
dBm
ns
Note Pin (1dB) is the measured input power level when the insertion loss increases 1 dB more than that of linear
range.
Caution
It is necessary to use DC blocking capacitors with the device.
The value of DC blocking capacitors should be chosen to accommodate the frequency of operation, bandwidth, switching
speed and the condition with the actual board of the system. The range of recommended DC blocking capacitor value is
less than 100 pF.