E110D-1 Datasheet, PDF (2/2 Pages) NEC – The right-sized edge-of-service server

NEC Express5800/E110d-1
Energy efficient
• Intelligent fan control to optimize fan
rotation and minimize cooling power
• Power capping feature provided as
standard to control power consumption
for each server
• 80 PLUS^® Gold certified power supply
for highly efficient AC/DC conversion
Smart installment
• Tool-free slide rail kit helps mount the
server into a rack frame without any
complexities
• The chassis depth of 62 cm (24.4 in)
enables installation into general rack
cabinets
Full remote manageability
• Integrated EXPRESSSCOPE Engine 3
technology enables remote control of
the system regardless of the type or
status of the OS.
• The EXPRESSBUILDER and ESMPRO
Suite enables installation, configuration,
and remote monitoring with ease.
Hardware Specification
MODEL
Processors
Memory
Maximum storage
Removable media
Expansion slots
Video
Network
Power consumption
System fans
Management
External interfaces
Dimensions (W x D x H) and weight
Temperature and humidity condition
(non-condensing)
Operating systems
Express5800/E110d-1
Number of processor: 1
Intel^® Celeon^® Processor G530 (2.40 GHz/2-core/2 MB)
Intel^® Xeon^® Processor E3-1260L (2.40 GHz/4-core/8 MB)
DDR3-1333 Unbuffered DIMM
Max.: 32 GB (4 x 8 GB)
3.5-inch SATA: 4 TB (4 x 3 TB)
-
Total: 2 slots
1 PCIe 2.0 x8 (x16 connector)
1 PCIe 2.0 x8 (x8 connector)
Integrated in the Server Management Controller (32 MB)
2 1000BASE-T/100BASE-TX/10BASE-T + 1 100BASE-TX for management
207 VA / 206 Watt (max, at 100 VAC)
standard
Remote management: EXPRESSSCOPE Engine 3 (Integrated remote media and KVM over IP)
Configuration software: EXPRESSBUILDER
Administration software: ESMPRO
1 display (15-pin mini D-sub), 1 serial (9-pin D-Sub), 8 USB2.0 (2 front, 4 rear, 2 internal),
2 1000BASE-T (RJ-45), 1 management LAN (RJ-45)
1U, 444.0 x 615.2 x 43.6 mm (17.5 x 24.2 x 1.7 in)
Max.: 18 kg (39.68 lb)
Operating: 10 to 40°C / 50 to 104°F , 20 to 80%
Non-operating: -10 to 50°C / 14 to 122°F, 20 to 80%
Microsoft^® Windows Server^® 2003 R2, Standard Edition (SP2 or later)
Microsoft^® Windows Server^® 2003 R2, Standard x64 Edition (SP2 or later)
Microsoft^® Windows Server^® 2003 R2, Enterprise Edition (SP2 or later)
Microsoft^® Windows Server^® 2003 R2, Enterprise x64 Edition (SP2 or later)
Microsoft^® Windows Server^® 2008 Standard
Microsoft^® Windows Server^® 2008 Standard (x64)
Microsoft^® Windows Server^® 2008 Enterprise
Microsoft^® Windows Server^® 2008 Enterprise (x64)
Microsoft^® Windows Server^® 2008 R2 Standard
Microsoft^® Windows Server^® 2008 R2 Enterprise
Red Hat^® Enterprise Linux^® 5.6 or later
Red Hat^® Enterprise Linux^® 5.6 or later (EM64T)
Note : For Linux support, go to the NEC website at http://www.nec.com/global/prod/express/linux/, or contact our sales representative
©Copyright 2012 NEC Corporation. The information and specification
contained in this publication are subject to modification without prior notice.
Microsoft and Windows Server are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries. Intel,
Intel Logo, Xeon, and Xeon Inside are trademarks of Intel Corporation in
the U.S. and/or other countries. Linux is a trademark of Linus Torvalds. Red
Hat is a registered trademark of Red Hat, Inc. in the U.S. All other names of
products and brands cited are the property of their respective owners. NEC
declines all responsibility in the case of photographic or typing errors.
Cat. No. E99-12020003E
E110d-1 March 2012
NEC Corporation
www.nec.com
Asia (APAC)
NEC Corporation
7-1, Shiba 5-chome Minato-ku
Tokyo 108-8001 Japan
www.nec.com/express
Europe (EMEA)
NEC France
IT Platform Solutions Division
29, rue des Hautes Pâtures
92737 Nanterre Cedex France
[phone]
www.nec-itplatform.com
North America
NEC Corporation of America
Information Technology Group
2880 Scott Blvd.
Santa Clara, CA 95050 U.S.
[phone]
www.necam.com/servers