B120G-H Datasheet, PDF (2/2 Pages) NEC – The flexible blade server

Hardware Specifications
NEC Express5800/B120g-h
MODEL
Express5800/B120g-h
Form factor / height
Number of processors
Processors
Memory type
Memory slots
Maximum memory
Storage type
Half-height blade
1 to 2
Intel^® Xeon^® Processor E5-2620 v4 (2.10 GHz/8-core/20 MB)
Intel^® Xeon^® Processor E5-2650 v4 (2.20 GHz/12-core/30 MB)
Intel^® Xeon^® Processor E5-2667 v4 (3.20 GHz/8-core/25 MB)
Intel^® Xeon^® Processor E5-2690 v4 (2.60 GHz /14-core/35 MB)
Intel^® Xeon^® Processor E5-2698 v4 (2.20 GHz/20-core/50 MB)
Intel^® Xeon^® Processor E5-2699 v4 (2.20 GHz/22-core/55 MB)
DDR4-2400 ECC RDIMM
18
1152 GB
Non-hot plug 2.5-inch SATA SSD
Maximum internal drive bays
2
Maximum internal storage
Expansion slots
Video (VRAM)
800 GB
1 Type I Mezzanine
1 Type II Mezzanine
1 PCIe for a flexible integrated NIC
Integrated in the server management controller (32 MB)
Systems management
EXPRESSSCOPE Engine 3
Interface
1 SUV
Enclosure
Blade Enclosure M
Blade Enclosure H v2
Temperature and humidity conditions
(non-condensing)
Operating: 5 to 40 °C */ 41 to 104 °F *, 20 to 80%
Non-operating: -10 to 55 °C/ 14 to 131 °F , 20 to 80%
* In specific configurations, the operable ambient temperature is up to 35°C/95°F
Operating systems and
virtualization software
Microsoft^® Windows Server^® 2012 R2 Standard / Datacenter
Red Hat^® Enterprise Linux^® 7
VMware^® ESXi™ 5.5
VMware^® ESXi™ 6
Note: For Linux support, visit the NEC website at http://www.nec.com/en/global/prod/express/linux/, or contact your sales representative
For further information please contact your local NEC representative or:
Corporate Headquarters (Japan)
NEC Corporation
www.nec.com
North America (USA, Canada)
NEC Corporation of America
www.necam.com
APAC (South Asia, South East Asia, Oceania)
NEC Asia Paci c Pte. Ltd.
sg.nec.com
© 2016 NEC Corporation. All rights reserved. NEC, NEC logo are trademarks or registered trademarks of NEC Corporation that may be registered in Japan
and other jurisdictions. All trademarks identi ed with ® or ™ are registered trademarks or trademarks respectively. The information and speci cations
contained in this publication are subject to change without prior notice. NEC shall not be responsible for technical or editorial errors. Models may vary for
each country. Please refer to your local NEC representatives for further details.
EMEA (Europe, Middle East, Africa)
NEC Enterprise Solutions
www.nec-enterprise.com
Cat.No. E03-16040008E