UPD160083 Datasheet, PDF (16/22 Pages) NEC – 480-OUTPUT TFT-LCD SOURCE DRIVER

µ PD160083
Electrical Characteristics (TA = –10 to +75 °C, VDD1 = 2.7 to 3.6V, VDD2 = 10.5 to 13.5 V , VSS1 = VSS2 = 0 V)
Parameter
Symbol
Condition
MIN.
TYP.
MAX.
Unit
Input Leak Current
IIL
High-Level Output Voltage VOH
STHR (STHL), IOH = 0 mA
VDD1 − 0.4
± 1.0
µA
VDD1
V
Low-Level Output Voltage VOL
γ -Corrected Resistance Rγ
Pull-up/pull-down
RPU
Resistance
Driver Output Current
IVOH
IVOL
Output Voltage Deviation ∆VO
(DVO)
Output Swing Voltage
Difference Deviation
(DVRMS)
∆Vp–p1
∆Vp–p2
STHR (STHL), IOL = 0 mA
VDD2 = 12.0 V, TA = 25°C,
V0-V8 = V9-V17 = 5.0 V
VDD1 = 3.3 V, MODE1 to MODE3, LPC, TEST
S1 to S480, RPO1, RPO2, VX = 11 V,
VDD2 = 12 V
VOUT = 10.5 V ^Note1
VX = 1.0 V,
VOUT = 1.5 V ^Note1
VO = 1.5 V to VDD2 – 1.5 V.
VO = 0.1 to 1.5 V,
VO = VDD2 – 1.5 V to VDD2 – 0.1 V
VO = 1.5 V to VDD2 – 1.5 V
VO = 0.1 to 1.5 V,
VO = VDD2 – 1.5 V to VDD2 – 0.1 V
VSS1
11.91
80
70
VSS1 + 0.4
V
17.02
22.13
kΩ
200
500
kΩ
−70
µA
µA
± 12
± 20
mV
± 40
± 50
mV
±6
± 10
mV
± 30
± 50
mV
Output Swing Voltage
Average Deviation
Logic Part Dynamic
Current Consumption 1
Logic Part Dynamic
Current Consumption 2
Driver Part Dynamic
Current Consumption
AVO
IDD11
IDD12
IDD2
Input data: 80H
VDD1 ^{Note1 to note3}
VDD1, ^{Note1 to note3}
VDD2 , with no load,
RPI1, RPI2 are not floating
±1
± 7.5
mV
2.5 ^Note2
6.0 ^Note3
mA
2.0 ^Note4
6.0 ^Note5
mA
15.0 ^Note6 45.0 ^Note7
mA
Notes 1. VX refers to the otuput voltage of analog output pins S1 to S384.
VOUT refers to the voltage applied to analog output pins S1 to S384.
2. fCLKP, fCLKN = 67.5 MHz, fSTB = 80.0 kHz, test pattern = dot inversion, TA = 25°C, VDD1 = 3.0 V
3. fCLKP, fCLKN = 67.5 MHz, fSTB = 80.0 kHz, test pattern = dot inversion, VDD1 = 3.6 V
4. fCLKP, fCLKN = 54.0 MHz, fSTB = 64.9 kHz, test pattern = dot inversion, TA = 25°C, VDD1 = 3.0V
5. fCLKP, fCLKN = 54.0 MHz, fSTB = 64.9 kHz, test pattern = dot inversion, VDD1 = 3.6 V
6. fCLKP, fCLKN = 67.5 MHz, fSTB = 80.0 kHz, test pattern = dot inversion, TA = 25°C, VDD2 = 12.0 V
7. fCLKP, fCLKN = 67.5 MHz, fSTB = 80.0 kHz, test pattern = dot inversion, VDD2 = 13.5 V
16
Preliminary Product Information S16450EJ1V0PM00