PS7360-1A Datasheet, PDF (10/12 Pages) NEC – 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET

PS7360-1A,PS7360L-1A
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
• Peak reflow temperature
235 °C (package surface temperature)
• Time of temperature higher than 210 °C 30 seconds or less
• Number of reflows
One
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt % is recommended.)
Recommended Temperature Profile of Infrared Reflow
100 to 160 ˚C
60 to 120 s
(preheating)
(heating)
to 10 s
to 30 s
235 ˚C (peak temperature)
210 ˚C
Time (s)
(2) Dip soldering
• Temperature
• Time
• Number of times
• Flux
260 °C or below (molten solder temperature)
10 seconds or less
One
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of
0.2 Wt % is recommended.)
(3) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
• Products in dry pack
After opening the dry pack, solder the products within the valid storage period specified on the label on the dry
pack.
10
Data Sheet P11567EJ6V0DS00