UPG2406TB Datasheet, PDF (1/13 Pages) NEC – 0.01 to 3.0 GHz SPDT SWITCH

DATA SHEET
GaAs INTEGRATED CIRCUIT
μPG2406TB
0.01 to 3.0 GHz SPDT SWITCH
DESCRIPTION
The μPG2406TB is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which were designed for
mobile phone and another L, S-band application.
This device can operate 2 control switching by control voltage 1.8 to 5.3 V. This device can operate frequency from
0.01 to 3.0 GHz, having the low insertion loss and high isolation.
This device is housed in a 6-pin super minimold package. And this package is able to high-density surface
mounting.
FEATURES
• Switch control voltage
: Vcont (H) = 1.8 to 5.3 V (2.7 V TYP.)
: Vcont (L) = −0.2 to +0.2 V (0 V TYP.)
• Low insertion loss
: Lins = 0.40 dB TYP. @ f = 1.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
: Lins = 0.47 dB TYP. @ f = 2.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
• High isolation
: ISL = 27 dB TYP. @ f = 1.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
: ISL = 17 dB TYP. @ f = 2.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
• Handling power
: Pin (0.1 dB) = +29.0 dBm TYP. @ f = 2.0/2.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
: Pin (1 dB) = +30.5 dBm TYP. @ f = 0.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
• High-density surface mounting : 6-pin super minimold package (2.0× 1.25 × 0.9 mm)
APPLICATIONS
• L, S-band digital cellular or cordless telephone
• W-LAN, WLL and Bluetooth^TM etc.
ORDERING INFORMATION
Part Number
Order Number
μPG2406TB-E4 μPG2406TB-E4-A
Package
6-pin super minimold
(Pb-Free)
Marking
Supplying Form
G5L • Embossed tape 8 mm wide
• Pin 4, 5, 6 face the perforation side of the
tape
• Qty 3 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: μPG2406TB
Caution Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can
damage this device. This device must be protected at all times from ESD. Static charges may
easily produce potentials of several kilovolts on the human body or equipment, which can
discharge without detection. Industry-standard ESD precautions must be employed at all times.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PG10747EJ01V0DS (1st edition)
Date Published January 2009 NS
Printed in Japan
2009