UPG2185T6R Datasheet, PDF (1/9 Pages) NEC – SPDT SWITCH FOR 2 GHz TO 6 GHz

DATA SHEET
GaAs INTEGRATED CIRCUIT
μPG2185T6R
SPDT SWITCH FOR 2 GHz TO 6 GHz
<R> DESCRIPTION
The μPG2185T6R is a GaAs MMIC SPDT (Single Pole Double Throw) switch which was designed for 2 GHz to 6
GHz applications, including dual-band wireless LAN. This device can operate frequency from 2 GHz to 6 GHz, having
the low insertion loss and high isolation.
This device is housed in a 6-pin plastic TSSON (Thin Shrink Small Out-line Non-leaded) package. And this
package is able to high-density surface mounting.
<R>
FEATURES
• Operating frequency
: f = 2.0 to 6.0 GHz
• Switch control voltage
: Vcont (H) = 2.8 to 3.3 V (3.0 V TYP.)
: Vcont (L) = −0.2 to 0.2 V (0 V TYP.)
• Low insertion loss
: Lins1 = 0.40 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
: Lins2 = 0.50 dB TYP. @ f = 2.5 to 6.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
• High isolation
: ISL1 = 26 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
: ISL2 = 25 dB TYP. @ f = 2.5 to 6.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
• Handling power
: Pin (1 dB) = +30.5 dBm TYP. @ f = 2.5 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
: Pin (1 dB) = +30.5 dBm TYP. @ f = 6.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
• High-density surface mounting : 6-pin plastic TSSON package (1.0 × 1.0 × 0.37 mm)
APPLICATIONS
• Wireless LAN (IEEE802.11a/b/g/n)
<R> • UWB, near field communications
ORDERING INFORMATION
Part Number
Order Number
Package
μPG2185T6R-E2 μPG2185T6R-E2-A 6-pin plastic TSSON
(Pb-Free)
Marking
Supplying Form
G8 • Embossed tape 8 mm wide
• Pin 1, 6 face the perforation side of the tape
• Qty 5 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: μPG2185T6R
Caution Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can
damage this device. This device must be protected at all times from ESD. Static charges may
easily produce potentials of several kilovolts on the human body or equipment, which can
discharge without detection. Industry-standard ESD precautions must be employed at all times.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PG10719EJ02V0DS (2nd edition)
Date Published August 2008 NS
Printed in Japan
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
2008