UPG2160T5K Datasheet, PDF (1/12 Pages) California Eastern Labs – L, S-BAND SINGLE CONTROL SPDT SWITCH

DATA SHEET
GaAs INTEGRATED CIRCUIT
µPG2160T5K
L, S-BAND SPDT SWITCH
DESCRIPTION
The µPG2160T5K is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which was developed
for mobile phone and another L, S-band applications.
This device can operate frequency from 0.5 to 3.0 GHz, having the low insertion loss and high isolation.
This device is housed in a 6-pin plastic TSSON (Thin Shrink Small Out-line Non-leaded) package. And this
package is able to high-density surface mounting.
FEATURES
• Supply voltage
: VDD = 2.4 to 2.8 V (2.6 V TYP.)
• Switch control voltage
: Vcont (H) = 2.4 to VDD (2.6 V TYP.)
: Vcont (L) = −0.2 to 0.2 V (0 V TYP.)
• Low insertion loss
: Lins1 = 0.30 dB TYP. @ f = 0.5 to 1.0 GHz, VDD = 2.6 V, Vcont (H) = 2.6 V, Vcont (L) = 0 V
: Lins2 = 0.35 dB TYP. @ f = 1.0 to 2.0 GHz, VDD = 2.6 V, Vcont (H) = 2.6 V, Vcont (L) = 0 V
: Lins3 = 0.40 dB TYP. @ f = 2.0 to 2.5 GHz, VDD = 2.6 V, Vcont (H) = 2.6 V, Vcont (L) = 0 V
: Lins4 = 0.50 dB TYP. @ f = 2.5 to 3.0 GHz, VDD = 2.6 V, Vcont (H) = 2.6 V, Vcont (L) = 0 V
• High isolation
: ISL1 = 25 dB TYP. @ f = 0.5 to 1.0 GHz, VDD = 2.6 V, Vcont (H) = 2.6 V, Vcont (L) = 0 V
: ISL2 = 18 dB TYP. @ f = 1.0 to 2.0 GHz, VDD = 2.6 V, Vcont (H) = 2.6 V, Vcont (L) = 0 V
: ISL3 = 17 dB TYP. @ f = 2.0 to 2.5 GHz, VDD = 2.6 V, Vcont (H) = 2.6 V, Vcont (L) = 0 V
: ISL4 = 13 dB TYP. @ f = 2.5 to 3.0 GHz, VDD = 2.6 V, Vcont (H) = 2.6 V, Vcont (L) = 0 V
• Handling power
: Pin (0.1 dB) = +21.0 dBm TYP. @ f = 2.0/2.5 GHz, VDD = 2.6 V, Vcont (H) = 2.6 V, Vcont (L) = 0 V
• High-density surface mounting : 6-pin plastic TSSON package (1.0 × 1.0 × 0.37 mm)
APPLICATIONS
• L, S-band digital cellular or cordless telephone
• W-LAN, WLL and Bluetooth^TM etc.
ORDERING INFORMATION
Part Number
µPG2160T5K-E2
Order Number
Package
µPG2160T5K-E2-A 6-pin plastic TSSON
(Pb-Free) ^Note
Marking
Supplying Form
G4 • Embossed tape 8 mm wide
• Pin 1, 6 face the perforation side of the tape
• Qty 5 kpcs/reel
Note With regards to terminal solder (the solder contains lead) plated products (conventionally plated), contact
your nearby sales office.
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: µPG2160T5K
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PG10635EJ01V0DS (1st edition)
Date Published September 2006 NS CP(K)
Printed in Japan
2006