English
Language : 

UPG2157T5F Datasheet, PDF (1/9 Pages) California Eastern Labs – 50 ohm TERMINATION TYPE HIGH POWER SPDT SWITCH FOR WiMAX
DATA SHEET
GaAs INTEGRATED CIRCUIT
μPG2157T5F
50 Ω TERMINATION TYPE HIGH POWER SPDT SWITCH FOR WiMAX
DESCRIPTION
The μPG2157T5F is a GaAs MMIC 50 Ω termination type high power SPDT (Single Pole Double Throw) switch
which was developed for WiMAX. This device can operate frequency from 2.3 to 5.85 GHz, having the low insertion
loss and high isolation.
This device is housed in a 12-pin plastic QFN (Quad Flat Non-leaded) package. And this package is able to high-
density surface mounting.
FEATURES
• Control voltage
: Vcont (H) = 2.5 to 3.3 V (3.0 V TYP.)
: Vcont (L) = 0 to 0.4 V (0 V TYP.)
• Low insertion loss
: Lins1 = 0.60 dB TYP. @ f = 2.3 to 2.7 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
: Lins2 = 0.60 dB TYP. @ f = 3.3 to 3.8 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
: Lins3 = 0.80 dB TYP. @ f = 5.15 to 5.85 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
• High isolation
: ISL1 = 28 dB TYP. @ f = 2.3 to 2.7 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
: ISL2 = 25 dB TYP. @ f = 3.3 to 3.8 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
: ISL3 = 22 dB TYP. @ f = 5.15 to 5.85 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
• Handling power
: Pin (1 dB) ≥ +37.0 dBm TYP. @ f = 2.5 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
: Pin (1 dB) ≥ +37.0 dBm TYP. @ f = 5.85 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
• High-density surface mounting : 12-pin plastic QFN package (3.0 × 3.0 × 0.75 mm)
APPLICATIONS
• Antenna switch for WiMAX, 802.11a/b/g access point
ORDERING INFORMATION
Part Number
Order Number
Package
μPG2157T5F-E2 μPG2157T5F-E2-A 12-pin plastic QFN
(Pb-Free)
Marking
Supplying Form
2157
• Embossed tape 8 mm wide
• Pin 1 indicates roll-in direction of tape
• Qty 3 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: μPG2157T5F
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PG10641EJ02V0DS (2nd edition)
Date Published August 2007 NS
Printed in Japan
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
2006, 2007