UPG183GR Datasheet, PDF (1/3 Pages) NEC – GaAs MMIC DBS 4X2 IF SWITCH

PRELIMINARY DATA SHEET
GaAs MMIC DBS 4X2 IF SWITCH UPG183GR
FEATURES
• FOUR INDEPENDENT IF CHANNELS
• INTEGRAL SWITCHING TO CHANNEL INPUT TO
EITHER CHANNEL OUTPUT
• INSERTION LOSS PER CHANNEL:
7 dB TYP (ZO = 50 Ω)
• FREQUENCY RANGE:
950 MHz to 2150 MHz
• CHANNEL TO CHANNEL ISOLATION:
26.5 dB TYP
• SMALL 16 PIN HTSSOP PACKAGE
DESCRIPTION
The UPG183GR is intended for use in Direct Broadcast Satellite
(DBS) applications within the Low Noise Block (LNB) down
converter, for systems where at least two LNB outputs are
required. It offers four intermediate frequency amplifier channels
that can independently select 1 of 4 IF inputs. It is housed in a
very small 16 pin plastic HTSSOP package, available on tape-
and-reel, easy to install and contributes to miniaturizing the
systems.
OUTLINE DIMENSIONS (Units in mm)
9
0.65±0.1
16 pin HTSSOP
6.4±0.3
8
0.20±0.10
0.20±0.10
5.5±0.3
16
1
5.2±0.2
0.9±0.2
1.8
0.4 0.5
2.7
0.1
2.5
1.5
ELECTRICAL CHARACTERISTICS
(TA = +25°C, unless otherwise specified, VCONT1 to VCONT8 = 0/+5 V, PIN = 0 dBm, ZO = 50 Ω, Each Port)
SYMBOLS
LINS 1
LINS 2
∆LINS
ISOL 1
ISOL 2
RL(OUT)
ICONT
PART NUMBER
PACKAGE OUTLINE
PARAMETERS AND CONDITIONS
Insertion Loss 1, f = 0.95 GHz to 1.5 GHz
Insertion Loss 2, f = 1.5 GHz to 2.15 GHz
Insertion Loss Flatness, | LINS (0.95 GHz)—LINS (2.15 GHz)|
Channel Isolation 1, f = 0.95 GHz to 1.5 GHz
Channel Isolation 2, f = 1.5 GHz to 2.15 GHz
Output Return Loss, f = 0.95 GHz to 2.15 GHz
Control Current¹, VCONT = +5 V/0 V, RFoff
UNITS
dB
dB
dB
dB
dB
dB
mA
UPG183GR
16 pin HTSSOP
MIN
TYP
—
7.0
—
8.0
—
1.5
24
26.5
22
23.5
10
14
—
—
MAX
9.0
10.0
3.0
—
—
—
0.5
Notes:
1. Per one control pin.
California Eastern Laboratories