UPG174TA Datasheet, PDF (1/12 Pages) NEC – L-BAND PA DRIVER AMPLIFIER

DATA SHEET
GaAs INTEGRATED CIRCUIT
µPG174TA
L-BAND PA DRIVER AMPLIFIER
DESCRIPTION
The µPG174TA is L-Band PA driver amplifier developed for digital cellular telephone and PCS applications. This
device feature high output power and low distortion with 2.8 V low voltage and 35 mA low current operation. It is
housed in a very small 6-pin minimold package available on tape-and-reel and easy to install and contributes to
miniaturizing the systems.
FEATURES
y Low operation voltage : VDD = 2.8 V
y Low distortion
: Padj1 = –60 dBc TYP. @ VDD = 2.8 V, fRF = 1 429 to 1 453 MHz, Pout = +10 dBm
Off-chip input and output matching
y Low operation current : IDD = 35 mA TYP. @ VDD = 2.8 V, fRF = 1 429 to 1 453 MHz, Pout = +10 dBm
Off-chip input and output matching
y 6-pin minimold package
APPLICATION
y Digital Cellular: PDC1.5G, DCS1800, PCS, etc.
ORDERING INFORMATION
Part Number
µPG174TA-E3
Package
6-pin minimold
Supplying Form
Carrier tape width is 8 mm.
Qty 3kp/reel.
Remark To order evaluation samples, please contact your local NEC sales office. (Part number for sample order:
µPG174TA)
ABSOLUTE MAXIMUM RATINGS (TA = +25°C)
Parameters
Supply Voltage
Input Power
Total Power Dissipation
Operating Ambient Temperature
Storage Temperature
Symbol
VDD
Pin
Ptot
TA
Tstg
Ratings
6.0
–10
170^Note
–30 to +90
–35 to +150
Unit
V
dBm
mW
°C
°C
Note Mounted on a 50 × 50 × 1.6 mm double copper clad epoxy glass PWB, TA = +85°C
Caution The IC must be handled with care to prevent static discharge because its circuit composed of
GaAs HJ-FET.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. P13230EJ2V0DS00 (2nd edition)
The mark shows major revised points.
Date Published January 2000 N CP(K)
©
Printed in Japan
1998, 2000