UPD78F0730MC-CAB-AX Datasheet, PDF (1/2 Pages) NEC – 8-Bit Microcontroller with Full-Speed USB 2.0

78K0/Kx2 Microcontroller
The USB microcontroller targets
applications such as serial-to-
USB and USB-to-serial interface
applications, medical equipment,
test and measurement products,
data loggers, and human interface
products such as mouse devices,
keyboards, and game controllers.
µPD78F0730
8-Bit Microcontroller with Full-Speed USB 2.0
The 8-bit μPD78F0730 microcontroller with internal Universal Serial Bus (USB) controller is
ideal for end-point USB applications that require a full-speed data transfer rate up to 12 Mbps.
Features
> NEC Electronics 8-bit 78K0CPU core
> 16 KB program flash memory (with self-programming capability)
> 3 KB RAM
> USB 2.0 interface (12 Mbps, full speed)
> Three USB-compliant end-point buffers
- 64-byte × 2 control read/write buffer
- 64-byte × 2 bulk input buffer
- 64-byte × 2 bulk output buffer
> One-channel 16-bit timer/event counter
> Two one-channel, 8-bit timers/event counters
> One-channel 8-bit timer
> One-channel watchdog timer (WDT)
TO00/TI010/P01
TI000/P00
TOH1/P16
TI150/TO50/P17
TI51/TO51/P33
RXD6/P14
TXD6/P13
SO10/P12
SI10/P11
SCK10/P10
USBP
USBM
USBPUC
16-Bit Timer (TM00)
8-Bit Timer (TMH1)
8-Bit Timer (TM50)
8-Bit Timer (TM51)
UART (UART6)
3-Wire Serial
Interface (CSI10)
POC/LVI
USB
X2/EXCLK/P122
X1/P121
78K0
CPU
Core
16K Byte
Flash
3KB RAM
PORT0
PORT1
PORT3
PORT6
PORT12
P01-P00
P17-P10
P33-P30
P60-P61
P120-P122
16MHz
Ring Oscillator
PLL
Main Oscillator
Interrupt
Controller
Watchdog
Timer
INTP0/P120
INTP1/P30
INTP2/P31
INTP3/P32
On-Chip
Debugger (OCD)
www.am.necel.com