UPD75P216A Datasheet, PDF (1/28 Pages) NEC – 4-BIT SINGLE-CHIP MICROCOMPUTER

DATA SHEET
MOS INTEGRATED CIRCUIT
µPD75P216A
4-BIT SINGLE-CHIP MICROCOMPUTER
The µPD75P216A is a One-Time PROM version of the µPD75216A. The µPD75P216A is suitable for small-
scale production or experimental production in system development.
Also see documents for the µPD75216A.
FEATURES
• The µPD75216A compatible
• 16256 ! 8 bits of on-chip one-time PROM
• Port 6 without pull-down resistor
• High voltage output for display
S0 to S8, T0 to T9: On-chip load resistor
S9, T10 to T15: Open drain
• Power-on reset circuit is not available
• Single power supply (5 V ± 10 %)
ORDERING INFORMATION
Part Number
µPD75P216ACW
Package
64-pin plastic shrink DIP (750 mil)
Caution Pull-up resistor mask options are not available.
Quality Grade
Standard
Please refer to "Quality grade on NEC Semiconductor Devices" (Document number IEI-1209) published by
NEC Corporation to know the specification of quality grade on the devices and its recommended applications.
Document No. IC–2670A
(O.D.No. IC-7625B )
Date Published July 1993 P
Printed in Japan
The information in this document is subject to change without notice.
The mark shows revised points.
1
© ^{NEC CORPORATI}1^O9^N9¹2⁹⁹⁰