UPD75P0016 Datasheet, PDF (1/60 Pages) NEC – 4-BIT SINGLE-CHIP MICROCONTROLLER

DATA SHEET
MOS INTEGRATED CIRCUIT
µPD75P0016
4-BIT SINGLE-CHIP MICROCONTROLLER
The µPD75P0016 replaces the µPD750008’s internal mask ROM with a one-time PROM and features expanded
ROM capacity.
Because the µPD75P0016 supports programming by users, it is suitable for use in prototype testing for system
development using the µPD750004, 750006, or 750008 products, and for use in small-lot production.
Detailed information about product features and specifications can be found in the following document
µPD750008 User's Manual: U10740E
FEATURES
• Compatible with µPD750008
• Memory capacity:
• PROM : 16384 × 8 bits
• RAM : 512 × 4 bits
• Can operate in same power supply voltage as the mask ROM version µPD750008
• VDD = 2.2 to 5.5 V
• Supports QTOP™ microcontroller
Remark QTOP Microcontroller is the general name for a total support service that includes imprinting, marking,
screening, and verifying one-time PROM single-chip microcontrollers offered by NEC.
ORDERING INFORMATION
Part number
µPD75P0016CU
µPD75P0016GB-3BS-MTX
Package
42-pin plastic shrink DIP (600 mil, 1.778-mm pitch)
44-pin plastic QFP (10 × 10 mm, 0.8-mm pitch)
ROM (× 8 bits)
16384
16384
Caution On-chip pull-up resistors by mask option cannot be provided.
The information in this document is subject to change without notice.
Document No. U10328EJ3V1DS00 (3rd edition)
Date Published August 2000 N CP(K)
The mark shows major revised points.
Printed in Japan
©
1995