UPD5715GR Datasheet, PDF (1/14 Pages) NEC – CMOS MMIC 4 x 2 IF SWITCH MATRIX

DATA SHEET
CMOS INTEGRATED CIRCUIT
µPD5715GR
CMOS MMIC 4 x 2 IF SWITCH MATRIX
FEATURES
• 4 independent IF channels, integral switching to channel input to either channel output
• Integrated 4 bit decoder
• Frequency range
: f = 250 to 2 150 MHz
• High isolation D/U ratio : ISL = 29 dB TYP.
• Insertion loss
: LINS = 6.7 dB TYP. @ZO = 50 Ω
• Insertion loss flatness : ∆LINS = 0.7 dB TYP.
• Control voltage
: VCONT = 0 V/+3.3 V
• 16-pin plastic HTSSOP package
APPLICATIONS
• DBS IF switching
• Switch box
• 4 × 2 switching application for microwave signal
ORDERING INFORMATION
Part Number
µPD5715GR-E1
Order Number
Package
µPD5715GR-E1-A 16-pin plastic
HTSSOP (Pb-Free)
Marking
Supplying Form
D5715
• Embossed tape 12 mm wide
• Pin 8, 9 face the perforation side of the tape
• Qty 3 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: µPD5715GR
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PU10601EJ01V0DS (1st edition)
Date Published May 2006 NS CP(K)
Printed in Japan
2005, 2006