UPD16886 Datasheet, PDF (1/16 Pages) NEC – MONOLITHIC 1.5-CHANNEL H BRIDGE DRIVER CIRCUIT FOR CAMERAS

DATA SHEET
MOS INTEGRATED CIRCUIT
µPD16886
MONOLITHIC 1.5-CHANNEL H BRIDGE DRIVER CIRCUIT FOR CAMERAS
DESCRIPTION
The µPD16886 is a monolithic H bridge driver LSI that employs N-channel MOSFETs in its output stage.
This IC incorporates a 1.5-channel H bridge circuit and can control two motors that do not operate at the same
time. In addition, forward/reverse, brake, and stop functions are available, making this LSI ideal for driving motors
such as the motor for winding the camera film and the lens zoom motor.
FEATURES
{ Large output current ID(DC) = 1.0 A During continuous operation
ID(pulse) = 2.8 A PW ≤ 20 ms, during single operation
ID(pulse) = 2.2 A PW ≤ 200 ms, during single operation
{ On-chip 1.5-channel H bridge circuit
{ Low on-resistance
RON = 0.5 Ω max. Sum of the top and bottom on-resistance, total temperature range
{ On-chip standby circuit to set the charge pump circuit to OFF
{ Low-voltage operation is possible (operable at 2.7 V or higher)
{ On-chip undervoltage lockout circuit
{ Mounted in a small-scale package
24-pin plastic TSSOP
ORDERING INFORMATION
Part Number
µPD16886MA-6A5
Package
24-pin plastic TSSOP (5.72 mm (225))
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. S14844EJ2V0DS00 (2nd edition)
Date Published May 2002 N CP(K)
©
Printed in Japan
2002