UPD168117A Datasheet, PDF (1/24 Pages) NEC – 7-CHANNEL H-BRIDGE DRIVER WITH A MICRO STEP FUNCTION SUPPORTING PULSE INPUT

DATA SHEET
MOS INTEGRATED CIRCUIT
µ PD168117A
7-CHANNEL H-BRIDGE DRIVER
WITH A MICRO STEP FUNCTION SUPPORTING PULSE INPUT
DESCRIPTION
The µ PD168117A is a 7-channel H-bridge driver with a micro step function supporting pulse input that consists of a
CMOS control circuit and a MOS output stage. It can reduce the current consumption and the voltage loss at the
output stage compared with a conventional driver using bipolar transistors, thanks to employment of a MOS process.
Moreover, at the µ PD168117A, micro step control of 128 divisions can perform stepping motor drive by the pulse
input, and motor can be driven by low noise and low vibration.
The package is a 64-pin FLGA that helps reduce the mounting area and height.
The µ PD168117A can be used to drive two stepping motors, or two DC motors and one coil.
FEATURES
• Seven H-bridge circuits employing power MOS FET
• Low-voltage driving
VDD = 2.7 to 3.6 V
VM = 2.7 to 5.5 V
• Output on-state resistance: 1.0 Ω TYP., 1.5 Ω MAX. (sum of top and bottom stage, ch1 to ch4, and ch7)
1.5 Ω TYP., 2.0 Ω MAX. (sum of top and bottom stage, ch5 and ch6)
• PWM output (ch1 to ch6), linear output (ch7)
• Output current
<ch1 to ch6>
DC current: 0.4 A/ch (when each channel is used independently)
Peak current: 0.7 A/ch (when each channel is used independently)
<ch7>
DC current: 0.5 A/ch (when used independently)
Peak current: 0.7 A/ch (when used independently)
• Input logic frequency: 150 kHz supported
• Under-voltage lockout circuit
Shuts down the internal circuit at VDD = 1.7 V TYP.
• Overheat protection circuit
Operates at 150°C or more and shuts down internal circuitry.
• Mounted on 64-pin FLGA (□6 mm, 0.65 mm pitch)
ORDERING INFORMATION
Part Number
µ PD168117AFC-BA2-E1-A ^Note
Package
64-pin plastic FLGA (6 x 6)
Packing Type
Embossed-type taping
Note Pb-free (This product does not contain Pb in external electrode and other parts.)
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. S17486EJ1V0DS00 (1st edition)
Date Published May 2005 NS CP(K)
Printed in Japan
2005