UPD16347 Datasheet, PDF (1/26 Pages) NEC – 192-BIT AC-PDP DRIVER

DATA SHEET
MOS INTEGRATED CIRCUIT
µ PD16347
192-BIT AC-PDP DRIVER
DESCRIPTION
The µ PD16347 is a high-withstanding-voltage CMOS driver designed for use with a flat display panel such as a
PDP, VFD, or EL panel. It consists of a 192-bit bi-directional shift register, 192-bit latch and high-withstanding-voltage
CMOS driver. The logic block operates with a 5.0 V power supply and 3.3 V interface so that it can be directly
connected to a gate array and microcomputer. The driver block provides a high-withstanding-voltage output: 80 V.
The logic and driver blocks are made of CMOS circuits, consuming lower power.
FEATURES
• 3-ch, 4-ch, 6-ch and 6-ch (3-ch + 3-ch) input port switching is possible using the IBS1 and IBS2 pins
• Many outputs: 192-bit output
• Clock transfer is switchable via the SDS pin between single edge and double edge
• Data control with transfer clock (external) and latch
• High-speed data transfer: fCLK = 60 MHz MAX. (at loading of data)
• On-chip chip temperature detection circuit
• High withstanding voltage and high drive output: 80 V MAX., +15/–30 mA MAX.
• 3.3 V input interface (VDD1 = 5.0 V)
• High-withstanding-voltage CMOS structure
ORDERING INFORMATION
Part Number
µ PD16347N-xxx
Package
TCP (TAB package)
Remark The TCP's external shape is customized. To order the required shape, please contact one of our sales
representatives.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. S16472EJ1V0DS00 (1st edition)
Date Published June 2003 NS CP(K)
Printed in Japan
The mark 5 shows major revised points.
2002