UPD16340 Datasheet, PDF (1/16 Pages) NEC – 96-BIT AC-PDP DRIVER

DATA SHEET
MOS INTEGRATED CIRCUIT
µ PD16340
96-BIT AC-PDP DRIVER
DESCRIPTION
The µ PD16340 is a high withstand voltage CMOS driver designed for use with a flat display panel such as a PDP,
VFD, or EL panel. It consists of a 96-bit bi-directional shift register, 96-bit latch and high withstand voltage CMOS
driver. The logic block operates with a 5-V power supply interface (CMOS level input) so that it can be directly
connected to a gate array and microcontroller. The driver block provides a high withstand voltage output: 80 V, +50/–
75 mA MAX. The logic and driver blocks are made of CMOS circuits, consuming lower power.
FEATURES
• Circuit configuration switched by the IBS pin between three 32-bit bi-directional shift registers and six 16-bit
bidirectional shift registers.
• Data control with transfer clock (external) and latch
• High-speed data transfer (fMAX. = 40 MHz MIN. at data latch)
(fMAX. = 25 MHz MIN. at cascade connection)
• High withstand output voltage (80 V, +50/–75 mA MAX.)
• 5-V CMOS input interface
• High withstand voltage CMOS structure
• _{ORDERING INFORMATION}
Part Number
µ PD16340
Package
Module
Caution Consult an NEC sales representative regarding the module. Since the module characteristics is
based on the module specifications, there may be differences between the contents written in this
document and real characteristics.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. S13685EJ1V0DS00 (1st edition)
The mark • shows major revised points.
Date Published December 1999 NS CP (K)
Printed in Japan
©
1998,1999