UPD12115 Datasheet, PDF (1/10 Pages) NEC – MOS INTEGRATED CIRCUIT

DATA SHEET
MOS INTEGRATED CIRCUIT
μ PD12115
1.5 V/1.0 A GENERAL-PURPOSE
CMOS REGULATOR
DESCRIPTION
μ PD12115 is a general-purpose CMOS regulator which has 1.5 V output voltage and 1.0 A output current capacity.
This product is suitable for low power-supply-voltage LSI etc. By ON/OFF function, the power consumption can be
kept low level at the time of off-state.
FEATURES
• Output Current: 1.0 A
• Output Voltage: 1.5 V (Fixed type)
PIN CONFIGURATION (Marking Side)
5-PIN TO-252 (5-PIN MP-3ZK)
• Output Voltage Tolerance: VO ± 2.0% (TJ = 25°C)
6
1. INPUT
• Dropout Voltage: VDIF = 1.0 V MAX. (IO = 1.0 A)
2. ON/OFF
• Quiescent Current: 150 μ A TYP. (IO = 0 A)
3. GND ^Note
• Standby Current: 1 μ A
• Available for laminated ceramic capacitor: (Electric capacity 10 μ F or higher)
1 2 345
4. NC
5. OUTPUT
• On-chip over-current protection circuit
6. GND (Fin)
• On-chip thermal shut down circuit
Note No.3 pin is cut and can not be connected
to substrate. No.6 is Fin and common to
APPLICATIONS
GND pin.
This regulator is suitable for low power-supply-voltage LSI which is used in digital appliances etc.
BLOCK DIAGRAM
−
Buffer
+
Constant Reference
Current
voltage
ON/OFF
Over-current
protection
−
Error
amp.
+
VIN
ON/OFF
VOUT
Triming
Thermal
shut down
GND
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. G18851EJ1V0DS00 (1st edition)
Date Published July 2007 NS
Printed in Japan
2007