UPC842GR-9LG Datasheet, PDF (1/10 Pages) NEC – BIPOLAR ANALOG INTEGRATED CIRCUIT SINGLE POWER SUPPLY, HIGH SPEED, WIDE BAND, DUAL OPERATIONAL AMPLIFIERS

DATA SHEET
BIPOLAR ANALOG INTEGRATED CIRCUIT
μ PC842GR-9LG, μ PC4742GR-9LG
SINGLE POWER SUPPLY, HIGH SPEED,
WIDE BAND, DUAL OPERATIONAL AMPLIFIERS
<R> DESCRIPTION
The μ PC842GR-9LG, μ PC4742GR-9LG are a high speed version of the operational amplifier μ PC1251GR-9LG,
μ PC1251MP-KAA, μ PC358GR-9LG for general single power supply use with high speed pulse response and high
stabilization. A high speed PNP transistor is used in the circuit which improves the characteristics such as a slew
rate, gain-bandwidth product, stabilization of the withstand load capacitance, with no crossover distortion compared to
μ PC1251GR-9LG, μ PC 1251MP-KAA, μ PC358GR-9LG.
Therefore, μ PC842GR-9LG, μ PC4742GR-9LG can be used in a wide range of application circuits for single power
supply AC amplifier, active filters, line driver and an amplifier for light receiving element etc.
The μ PC842GR-9LG which expands temperature type is suited for wide operating ambient temperature use, and
μ PC4742GR-9LG is used for general purposes.
μ PC844GR-9LG, μ PC4744GR-9LG which are quad types with the same circuit configuration are also available as
series of operational amplifiers.
<R> FEATURES
• Slew Rate (AV = +1)
(V⁺ = +5 V, V^− = GND)
7 V/μs (TYP.)
• Stability to capacitive loads (load capacity, 1000 pF)
• Internal frequency compensation
• Gain Band Width Product 3.5 MHz (TYP.) • Output short-circuit protection
• Input Offset Voltage
±2 mV (TYP.)
• A pin connection (pin compatible) of a standard dual operational
• Input Offset Current
±6 nA (TYP.)
amplifier.
• Wide operating ambient temperature range
μ PC842GR-9LG: TA = −40 to +125°C, μ PC4742GR-9LG: TA = −40 to +85°C
• Small Package (The mounting area is reduced to about 60% compared to the conventional 8-pin plastic SOP (1.27
mm pitch))
<R> ORDERING INFORMATION
Part Number
μ PC842GR-9LG-E1-A ^Note
Selected Grade
Standard
μ PC842GR-9LG-E2-A ^Note
Standard
μ PC4742GR-9LG-E1-A ^Note
Standard
μ PC4742GR-9LG-E2-A ^Note
Standard
Package
8-pin plastic TSSOP (5.72 mm(225))
8-pin plastic TSSOP (5.72 mm(225))
8-pin plastic TSSOP(5.72 mm(225))
8-pin plastic TSSOP(5.72 mm(225))
Package Type
• 12 mm wide embossed taping
• Pin 1 on draw-out side
• 12 mm wide embossed taping
• Pin 1 at take-up side
• 12 mm wide embossed taping
• Pin 1 on draw-out side
• 12 mm wide embossed taping
• Pin 1 at take-up side
Note Pb-free (This product does not contain Pb in the external electrode and other parts.)
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. G17932EJ4V0DS00 (4th edition)
Date Published December 2007 NS
Printed in Japan
The mark <R> shows major revised points.
2006, 2007
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.