English
Language : 

UPC3221GV Datasheet, PDF (1/6 Pages) NEC – NECs GENERAL PURPOSE 5 V AGC AMPLIFIER
NEC's GENERAL PURPOSE 5 V
AGC AMPLIFIER
UPC3221GV
FEATURES
• ON-CHIP LOW DISTORTION AMPLIFIER:
IIP3 = +2.5 dBm at minimum gain
• WIDE AGC DYNAMIC RANGE:
GCR = 50 dB TYP
• ON-CHIP VIDEO AMPLIFIER:
VOUT = 1.0 VP-P at single-ended output
• SUPPLY VOLTAGE:
VCC = 5 V
• PACKAGED IN 8 PIN SSOP SUITABLE FOR
SURFACE MOUNTING
• LOW NOISE FIGURE:
4.2 dB TYP
DESCRIPTION
Nec's UPC3221GV is a Silicon Monolithic IC designed for
use as an AGC AmpliÞer for digital CATV, cable modem and
IP telephony systems. This IC consists of a two stage gain
control ampliÞer and a Þxed gain video ampliÞer. The device
provides a differential input and differential output for noise
performance, which eliminates shielding requirements.
The package is 8-pin SSOP (Shrink Small Outline Package)
suitable for surface mount.
This IC is manufactured using NEC's 10 GHz fT NESATΙΙ
AL silicon bipolar process. This process uses silicon nitride
passivation Þlm. This material can protect chip surface from
external pollution and prevent corrosion/migration. Thus, this
IC has excellent performance, uniformity and reliability.
NEC's stringent quality assurance and test procedures ensure
the highest reliability and performance.
INTERNAL BLOCK DIAGRAM AND PIN
CONFIGURATION
VCC 1
IN1 2
AGCAMP
VideoAMP
IN2 3
VAGC 4 AGC Cont.
PACKAGE OUTLINE S08
8 765
8 GND1
7 OUT1
6 OUT2
5 GND2
3221
N
1 2 34
3.0 MAX
All dimensions are typical unless speciÞed otherwise.
APPLICATIONS
• Digital CATV
• Cable modem receivers
• IP Telephony receivers
ELECTRICAL CHARACTERISTICS
(TA = 25°C, VCC = 5 V, ZS = 1KΩ, ZL = 1KΩ, fIN = 45 MHz, single-ended output), unless otherwise noted
PART NUMBER
PACKAGE OUTLINE
SYMBOLS
PARAMETERS AND CONDITIONS
DC Characteristics
ICC
Circuit Current1 (no input signal)
IAGC (H) AGC Pin Current1, No input Signal, VAGC = 3.5 V
VAGC (H) AGC Voltage High Level1, at Maximum gain
VAGC (L) AGC Voltage Low Level1, at Minimum gain
RF Characteristics
GMAX
GMID1
Maximum Gain1 , VAGC = 3.0 V, Pin = -60 dBm
Middle Gain 11, VAGC = 2.2 V, Pin = -60 dBm
UNITS
UPC3221GV
S08
MIN TYP MAX
mA
26
33
41
V
−
16
50
V
3.0
−
3.5
V
0
−
0.5
dB
57
60
63
dB 47.5 50.5 53.5
California Eastern Laboratories