UPC2807 Datasheet, PDF (1/8 Pages) NEC – PREAMPLIFIER FOR INFRARED REMOTE CONTROLLER

DATA SHEET
BiCMOS INTEGRATED CIRCUIT
µ PC2807,2807A
PREAMPLIFIER FOR INFRARED REMOTE CONTROLLER
DESCRIPTION
The µ PC2807 and 2807A are semiconductors integrated circuit developed as preamplifiers for the receiver module of
infrared remote controllers. These preamplifiers can be directly connected to a PIN photodiode, and integrate a high-gain
first stage amplifier, limiter, bandpass filter, detector circuit, and waveform-shaping circuit on a single chip.
FEATURES
• Only PIN photodiode required as an external component.
• Following carrier frequencies (fO) selectable (five types):
µ PC2807 : fO = 32.7, 36.0, 36.7, 37.9 kHz
µ PC2807A : fO = 40.0 kHz
• Fixed trap frequency
fT = 54 kHz
• Active-low output
• Supplied in form of wafer
APPLICATION
• Receiver module of infrared remote controller
ORDERING INFORMATION
Part Number
Condition in shipment
µ PC2807W
Wafer
µ PC2807AW
Wafer
Contact an NEC sales representative in advance since a memorandum on product quality need to be prepared for
shipment in the form of wafer.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. S13198EJ1V0DS00 (1st edition)
Date Published May 2000 NS CP (K)
Printed in Japan
The mark 5 shows major revised points.
1998, 2000