UPC24A00 Datasheet, PDF (1/12 Pages) NEC – THREE TERMINAL LOW DROPOUT VOLTAGE REGULATOR

D^DA^AT^TA^A S^SHEE^T
BIPOLAR ANALOG INTEGRATED CIRCUIT
µPC24A00 Series
THREE TERMINAL LOW DROPOUT VOLTAGE REGULATOR
The µPC24A00 Series is a low dropout voltage three terminal regulator that has realized a minimum voltage
differential between the I/O of no more than 1 V when the output current is 2 A through the employment of a PNP
transistor at the output stage.
Due to its ability to achieve a greater reduction in the power loss compared with conventional three-terminal
regulators, the µPC24A00 Series is ideal for use as the secondary side smoothing circuit of a power supply.
FEATURES
PIN CONFIGURATION (Marking Side)
• Output current in excess of 2.0 A
3-pin plastic SIP (MP-45G)
• High accuracy of output voltage
µPC24A05HF, 24A12HF, 24A15HF
∆ VO = ±2% MAX. (TJ = 25°C, IO = 1 A)
• Low dropout voltage
VDIF = 1 V MAX. (IO = 2 A)
• On-chip thermal shut down circuit, over-current protection
circuit and safe operating area protection circuit
123
1: INPUT
2: GND
3: OUTPUT
ORDERING INFORMATION
Part Number
µ PC24A05HF
µ PC24A12HF
µ PC24A15HF
Package
3-pin plastic SIP (MP-45G) (isolated TO-220)
3-pin plastic SIP (MP-45G) (isolated TO-220)
3-pin plastic SIP (MP-45G) (isolated TO-220)
Output Voltage
5V
12 V
15 V
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. G14632EJ3V0DS00 (3rd edition)
Date Published February 2000 N CP(K)
Printed in Japan
©
2000