|
PS9611 Datasheet, PDF (1/12 Pages) NEC – HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps, TOTEM-POLE OUTPUT TYPE 8-PIN DIP PHOTOCOUPLER | |||
|
DATA SHEET
PHOTOCOUPLER
PS9611,PS9611L
HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps, TOTEM-POLE OUTPUT TYPE
8-PIN DIP PHOTOCOUPLER
âNEPOCTM Seriesâ
DESCRIPTION
The PS9611 and PS9611L are optically coupled high-speed, totem-pole output isolators containing a GaAlAs LED
on light emitting diode (input side) and a photodiode and a signal processing circuit on light receiving side (output
side) on one chip.
The PS9611 is in a plastic DIP (Dual In-line Package) and the PS9611L is lead bending type (Gull-wing) for
surface mounting.
FEATURES
⢠High common mode transient immunity (CMH, CML = ±10 kV/µs TYP.)
⢠High-speed response (tPHL, tPLH = 30 ns TYP.)
⢠Pulse width distortion (tPHL â tPLH = 3 ns TYP.)
⢠Totem-pole output (No pull-up resistor required)
⢠Ordering number of taping product: PS9611L-E3, E4: 1 000 pcs/reel
APPLICATIONS
⢠Computer and peripheral manufactures
⢠Measurement equipment
⢠PDP
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. P13102EJ3V0DS00 (3rd edition)
The mark ⢠shows major revised points.
Date Published February 2000 NS CP(K)
Printed in Japan
©
1997, 2000
|
▷ |