MC-9400A Datasheet, PDF (1/16 Pages) NEC – 320 (240)-BIT AC- PDP DRIVER MODULE

DATA SHEET
HYBRID INTEGRATED CIRCUIT
MC-9400A
320 (240)-BIT AC- PDP DRIVER MODULE
DESCRIPTION
The MC-9400A is a PDP driver module that incorporates five 64-bit high breakdown voltage output (150 V, 40 mA)
CMOS driver ICs. It supports 320 outputs in the case of 4-bit parallel input, and 240 outputs in the case of 3-bit parallel
input.
The integrated structure of the MC-9400A, which combines a COB with an aluminum heat sink and an output flexible
printed circuit (FPC) board, enables the easy implementation of heat dissipation measures and high-density mounting.
FEATURES
• Incorporates five µPD16337s with four 16-bit bi-directional shift registers
• Low thermal resistance realized by chip-on-metal structure
• Provided with connector and capacitor for easy mounting on a panel
• Supports output electrode with a narrow pitch through use of a flexible printed circuit board
• Polarity of all driver outputs can be inverted through use of /PC pins
• Supports custom modules
Remark /XXX indicates active low.
ORDERING INFORMATION
Part Number
MC-9400A
Package
COB
The information in this document is subject to change without notice.
Document No. S13787EJ2V0DS00 (2nd edition)
Data Published October 1998 NS CP(K)
Printed in Japan
The mark 5 shows major revised points.
© NEC Corporation 1998