LD7710 Datasheet, PDF (1/4 Pages) NEC – 14GHz, 40 W CW PPM FOCUSING, MINIMUM SIZE

DATA SHEET
MEDIUM POWER TRAVELING WAVE TUBE
FOR GROUND TERMINALS
LD7710
14GHz, 40 W CW PPM FOCUSING, MINIMUM SIZE
GENERAL DESCRIPTION
The NEC LD7710 is a PPM focused traveling wave tube designed for final amplifier tube in the earth-to-satellite
communication's transmitter.
This is capable of delivering an output power of 40 W over the range of 13.75 to 14.5 GHz.
It provides a mid power gain of 26 dB at 40 W level.
Furthermore, this is of rugged and reliable design offering long life services.
FEATURES
™ Lightweight, Compact and Efficient
The tube has a dual-depressed collectors and is designed to operate at high efficiency across the power
output range. It features state-of-the-art techniques to optimize size and efficiency.
™ Low Distortion
Distortion is a very important factor in multiplex digital signals transmission. NEC has developed techniques
for the correction of non-linear distortion of gain and phase generated in a TWT. As a result, the TWT has an
optimum performance across a broad power range and is ideally suited for multi-carrier transmission systems.
™ Right Power Gain for Minimum Size
The power gain is designed into 26 dB at 40 W level in order to keep the tube length minimum.
™ Simple Cooling System
The tube is conduction cooled, so that the cooling system is simplified.
™ PPM Focusing
The tube is PPM (Periodic Permanent Magnet) -focused, eliminating entirely the focusing power supplies and
interlock circuits.
™ Rugged Construction
The tube is designed to be rugged, therefore it is suitable for transportable systems.
™ Long Life and High Stability
The tube employs an advanced impregnated cathode with the low operating temperature for long life. The
TWT is designed to have a lifetime of 100,000 hours or more.
™ Microdischarge Free
The tube is carefully designed to be free from microdischarge in the electron gun for long time operation,
therefore it is suitable for digital communication services.
For safety use of microwave tubes, refer to NEC document “Safety instructions to all personnel
handling electron tubes” (ET0048EJ∗V∗UM00)
The information in this document is subject to change without notice.
Document No. ET0199EJ2V0DS00 (2nd edition)
Date Published May 1997 M
Printed in Japan
©
1996