NV13M09WN Datasheet, PDF (1/2 Pages) NIHON DEMPA KOGYO – Voltage-Controlled Crystal Oscillator (VCXO) NV13M09W Series

Crystal Oscillator
Model Name NV13M09WN
Voltage-Controlled Crystal Oscillator (VCXO) NV13M09W Series
■ Main Application
For basestation
■ Features
● SMD crystal oscillator with a glass epoxy circuit board and a metal lid.
● Frequency range : 75 to 800MHz. A wide frequency band. (PECL)
● Low jitter(Max. 1ps)
● Fundamental crystal units are designed. (Frequency Multiplying Model from 210MHz)
● Enable/Disable function is optional.
● Low power supply voltage (+3.3 V)
■ Specifications
Item
Nominal frequency range (MHz)
Supply voltage [VCC](V)
Control voltage [Vcont](V)
Current consumption (mA)
Output voltage
Symmetry (%)
Rise time / Decay(fall)time
Output load condition (PECL)
Operating temperature Range (°C)
Storage temperature range (°C)
Overall frequency tolerance (*1)
Frequency control range
Frequency change polarity
Linearity of frequency modulation deviation
Input impedance
Phase jitter
Model
*Please specify products with or without Enable/Disable function.
NV13M09WN
75 ≤ f < 800
+3.3V±10%
+1.65±1.5
Max. 65
VOH : Min. VCC-1.02 V , VOL : Max. VCC-1.60 V
45 to 55 (at 50%Vout)
Max.1ns (20% to 80%)
50Ω (VCC–2V)
–40 to +85
–55 to +125
Max. ±50×10^–6
Min. ±100×10^–6
Positive
Max. 5%
Min. 100kΩ
Max. 1ps (12kHz to 20MHz)
(*1) Overall frequency tolerance includes "Frequency/temperature characteristics","Frequency tolerance","Frequency/voltage
coefficient","Frequency/load coefficient" and "Long-term frequency stability(1 year)".
■ Dimensions
■ List of Enable / Disable function
13.8±0.3
mm
Terminal land connections
#1
Vcont
#2
NC or E/D
#3
GND
#4
OUTPUT
#5
OUTPUT
#6
VCC
Input (#2)
Low (VIL ≤VCC-1.5V) or NC
High (VIH ≥VCC-1.1V)
Output (#4, #5)
Nominal frequency Output
High Z
1.0±0.2
#1 #2 #3
Land pattern (Typical)
1.3
#6 #5 #4
5.08±0.2
2.54 2.54
Height 4.7mm and 5.5mm are available.
- 15 -
12A_1026_NV13M09WN_e