AQH1223 Datasheet, PDF (5/6 Pages) Nais(Matsushita Electric Works) – AQ-H SOLID STATE RELAY

2) Tube
Devices are packaged in a tube so pin No.
1 is on the stopper B side. Observe
correct orientation when mounting them
on PC boards.
(DIP type)
StopperB
StopperA
9. Transportation and storage
1) Extreme vibration during transport will
warp the lead or damage the relay.
Handle the outer and inner boxes with
care.
2) Storage under extreme conditions will
cause soldering degradation, external
appearance defects, and deterioration of
the characteristics. The following storage
conditions are recommended:
• Temperature: 0 to 45°C 32 to 113°F
• Humidity: Less than 70% R.H.
• Atomosphere: No harmful gasses such
as sulfurous acid gas, minimal dust.
AQ-H
5