RP1-1.5V Datasheet, PDF (1/4 Pages) Nais(Matsushita Electric Works) – LOW PROFILE HIGH FREQUENCY RELAY

RP-RELAYS ^{LOW PROFILE HIGH}
FREQUENCY RELAY
10.6
9
.417
.748
4
.157
mm inch
• High frequency relay with the low profile of 4 mm .157 inch
• Excellent high frequency characteristics
Isolation: Min. 10dB (at 1.8 GHz)
Insertion loss: Max. 1.0dB (at 1.8 GHz)
V.S.W.R.: Max. 1.3 (at 1.8 GHz)
• High sensitivity in small size
Size: 10.6 × 9 × 4 mm .417 × .354 × .157 inch
Nominal operating power: 140 mW
SPECIFICATIONS
Contact
Arrangement
Movable
Contact material
Stationary
Initial contact resistance, max.
(By voltage drop 6 V DC 0.1 A)
Rating
Nominal switch-
ing capacity
High frequency
characteristics
(Impedance 50Ω)
Isolation
Insertion loss
V.S.W.R.
Expected life
(min. opera-
tions)
Mechanical
(at 180 cpm)
Electrical
(at 20 cpm)
Coil (at 25°C, 68°F)
Voltage type
1.5 to 12 V DC
24 V DC
1 Form C
Silver alloy
Gold-clad silver
50 mΩ
0.1 A 30 V DC
Contact switching power: 1 W
(Max. 1.8 GHz); Contact carrying
power: 3 W (Max. 1.2 GHz)
1 W (Max. 1.8 GHz)
Min. 15 dB (at 1 GHz)
Min. 10 dB (at 1.8 GHz)
Max. 0.5 dB (at 1 GHz)
Max. 1 dB (at 1.8 GHz)
Max. 1.2 (at 1 GHz)
Max. 1.3 (at 1.8 GHz)
5×10⁶
10⁵ (0.1 A 30 V DC)
10⁵ (1 W at 1.8 GHz;
V.S.W.R.: max. 1.3)
Nominal operating power
140 mW
270 mW
Characteristics
Max. operating speed (at rated load)
20 cpm
Initial insulation resistance*¹
Min. 1,000 MΩ at 500 V DC
Initial breakdown Between open contacts
voltage*²
Between contacts and coil
750 Vrms for 1 min.
1,500 Vrms for 1 min.
Operate time*³ (at nominal voltage)
Max. 3 ms
(Approx. 1.5 ms)
Release time(without diode)*³
(at nominal voltage)
Max. 2 ms
(Approx. 1 ms)
Temperature rise
Max. 50°Cwith nominal coil
voltage across coil and at
nominal switching capacity
Shock resistance
Functional*⁴
Destructive*⁵
Min. 500 m/s² {50 G}
Min. 1,000 m/s² {100 G}
Vibration
resistance
Functional*⁶
Destructive
10 to 55 Hz
at double amplitude of 3 mm
10 to 55 Hz
at double amplitude of 5 mm
Conditions for operation,
transport and storage
Ambient temp.
(Not freezing and condensing
at low temperature)
Humidity
–40°C to 70°C
–40°F to 158°F
5 to 85% R.H.
Unit weight
Approx. 1 g .04 oz
Remarks
* Specifications will vary with foreign standards certification ratings.
*¹ Measurement at same location as “Initial breakdown voltage” section
*² Detection current: 10mA
*³ Excluding contact bounce time
*⁴ Half-wave pulse of sine wave: 11ms, detection time: 10µs
*⁵ Half-wave pulse of sine wave: 6ms
*⁶ Detection time: 10µs
TYPICAL APPLICATIONS
• Antenna switching of mobile phone
• Switching signal of measuring equipment
ORDERING INFORMATION
Ex. RP 1
H
3V
Contact arrangement
Terminal shape
1:1 Form C
Nil: Standard PC board terminal
H: Self-clinching terminal
Note: Standard packing; Carton: 50 pcs. Case 1,000 pcs.
Coil voltage (DC)
1.5, 3, 4.5, 5, 6, 9, 12, 24 V
93