JV1APF-S-12V Datasheet, PDF (1/4 Pages) Nais(Matsushita Electric Works) – FLAT TYPE POWER RELAY

JV-RELAYS ^{FLAT TYPE POWER RELAY}
22
.866
16
.630
10.9
.429
mm inch
FEATURES
• Flat type: 16 mm (length) × 22 mm (width) × 10.9 mm (height)
(.630×.866×.429 inch)
• High capacity type (16A) available
• High sensitivity type (100 mW: 1 Form A) available
• TÜV also approved
SPECIFICATIONS
Contact
Arrangement
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
Contact material
Nominal switching
capacity
Rating ^{Max. switching power}
(resistive)
Max. switching voltage
Max. switching current
Expected life (min. ope.)
Mechanical at (180 cpm)
Electrical at resistive ^{Sealed type}
(at 20 cpm)
Flux-resistant
(at rated load)
type
Standard type
1 Form A
1 Form C
High capacity
High
type
sensitivity type
1 Form A
1 Form A
50 mΩ
Silver alloy
10 A 125 V AC
10 A 125 V AC (N.O.)
6 A 125 V AC (N.C.)
16 A 125 V AC
10 A 125 V AC
1,250 VA
1,250 VA (N.O.)
750 VA (N.C.)
2,000 VA
1,250 V
125 V AC
10 A
10 A (N.O.)
6 A (N.C.)
16 A
10 A
10⁷
10 ⁵
10⁵
3×10⁴
5×10⁴
3×10⁵
10⁵
10⁵
10⁵
Coil
1 Form A type
Nominal
operating
power
Standard type
High capacity type
High sensitivity type
200 mW (up to 48 V coil type)
600 mW (100 V coil type)
100 mW
1 Form C type
400 mW (up to 48 V coil type)
600 mW (100 V coil type)
—
—
Remarks
* Specifications will vary with foreign standards certification ratings.
*¹ Measurement at same location as "Initial breakdown voltage"section
*² Detection current: 10mA
*³ Excluding contact bounce time
*⁴ Half-wave pulse of sine wave: 11ms, detection time: 10µs
*⁵ Half-wave pulse of sine wave: 6ms
*⁶ Detection time: 10µs
*⁷ Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24).
*⁸ 100V type: –40 to + 60°C –40 to + 140°F
TYPICAL APPLICATIONS
1. Home appliances: Air conditioner, heater, etc.
2. Automotive: Power supply for car stereo and air conditioner
Characteristics
Max. operating speed
20 cpm
Initial insulation resis-
tance* ¹
Min. 100 MΩ
(at 500 V DC)
Initial ^{Between open}
break- ^contacts
down _{Between con-}
voltage*² _{tacts and coil}
1,000 Vrms
for 1 min.
1,500 Vrms
for 1 min.
Operate time*³
(at nominal voltage)
Approx. 10 ms
Approx. 5 ms
(100 V DC coil type)
Release time (without diode)*³
(at nominal voltage)
Approx. 4 ms
Temperature rise
(at 50°C)
Max. 65°C with nominal
coil voltage across
coil and at nominal
switching capacity
Functional*⁴ Min. 98 m/s² {10 G}
Shock
resistance _Destructive*5
Min. 980 m/s²
{100 G}
Functional* ⁶
Vibration
resistance
Destructive
10 to 55 Hz
at double amplitude
of 1.0 mm
10 to 55 Hz
at double amplitude
of 1.6 mm
Conditions for opera- Ambient
tion, transport and temp.
storage*⁷
(Not freezing and
condensing at low ^Humidity
temperature)
–40°C to +70°C*⁸
–40°F to +158°F
5 to 85%R.H.
Unit weight
Approx. 8 g .282 oz
ORDERING INFORMATION
Ex. JV 1a
P
F
S
12V
Contact arrangement
1: 1 Form C
1a: 1 Form A
Rating
Nil: Standard type
P: High capacity type*
Protective construction
Nil: Sealed type
F: Flux-resistant type
Sensitivity
Nil: Standard type
(1 Form A: 200 mW, 1Form C: 400 mW
100 V DC coil type: 600 mW)
S: High sensitivity type*
(1 Form A: 100 mW)
Coil voltage (DC)
5, 6, 9, 12, 18,
24, 48, 100V
Notes: 1. Standard packing: Carton: 50 pcs.; Case: 1,000 pcs.
2. Coil voltage DC 48, 100 V types are not available for high sensitivity type.
UL/CSA, TÜV approved type is standard.
* Only for 1 Form A type
87