HA1-AC115 Datasheet, PDF (1/3 Pages) Nais(Matsushita Electric Works) – COST SAVING SUBMINIATURE PC BOARD RELAYS

COST SAVING
SUBMINIATURE
PC BOARD RELAYS
HA-RELAYS
26.3
1.035
14.0
.551
16.9
.665
26.5
1.043
14.2
.559
17.7
.697
HAE Amber Relays
mm inch
SPECIFICATIONS
HA1 Standard type
Contacts
Arrangement
Contact material
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
Rating
(resistive
load)
Max. switching power
Max. switching voltage
Max. switching current
Expected ^Mechanical
life (min. _Electrical 3 A 250 V AC
operations) _{(resistive) 3 A 30 V DC}
1 Form C
Silver-nickel
50 mΩ
750 VA, 90 W
250 V AC, 30 V DC
3A
10 ⁷
10 ⁵
5×10⁵
Coil
Minimum operating power
Nominal operating power
(AC) 0.58 VA, (DC) 230 mW
(AC) 0.9 VA, (DC) 360 mW
Characteristics
Maximum operating speed
20 cpm
Initial insulation resistance*¹
(at 25°C, 50% R.H.)
Min. 100 MΩ at 500 V DC
Initial
Between open contacts
breakdown
voltage*^{2 Between contacts and coil}
750 Vrms for 1 min.
1,500 Vrms for 1 min.
Operate time*³ (at nominal voltage)
(at 20°C)
Approx. 6 ms (AC),
Approx. 5 ms (DC)
Release time (without diode)*³
(at nominal voltage)(at 20°C)
Approx. 6 ms (AC),
Approx. 3 ms (DC)
Temperature rise (at 20°C)
Max. (AC) 60°C, (DC) 40°C
with nominal coil voltage and
at 3A switching current
Shock resistance
Functional
Destructive
98 m/s² {10G}
980 m/s² {100G}
Vibration resistance
Functional
Destructive
10 to 55Hz
at double amplitude of 1mm
10 to 55Hz
at switching of 2mm
Conditions for operation,
transport and storage*⁴
(Not freezing and con-
densing at low tempera-
ture)
Ambient
temp.
Humidity
–40°C to +50°C
–40°F to +122°F
5 to 85%R.H.
Unit weight
Approx. 15 g .53 oz
Remarks
* Specifications will vary with foreign standards certification ratings.
*¹ Measurement at same location as "Intial breakdown voltage" section
*² Detection current: 10 mA
208
FEATURES
• Compact construction
• Sensitive - very low operating power
• Soldering flux inflow prevented by molded construction
• Contact capacity - 3 A 250 V AC, 30 V DC
• Simple mechanism for stable quality - only 9 pieceparts
• Amber sealed types available
HA1E Amber sealed type
Contacts
Arrangement
Contact material
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
Rating
(resistive
load)
Max. switching power
Max. switching voltage
Max. switching current
Expected ^Mechanical
life (min. _Electrical 2 A 250 V AC
operations) _{(resistive) 3 A 30 V DC}
1 Form C
Gold-clad over silver-nickel
50 mΩ
500 VA, 90 W
250 V AC, 30 V DC
2 A AC, 3A DC
10 ⁷
10 ⁵
2×10⁵
Coil
Minimum operating power
Nominal operating power
(AC) 0.58 VA, (DC) 230 mW
(AC) 0.9 VA, (DC) 360 mW
Characteristics
Maximum operating speed
20 cpm
Initial insulation resistance*¹
(at 25°C, 50% R.H.)
Min. 100 MΩ at 500 V DC
Initial
Between open contacts
breakdown
voltage*^{2 Between contacts and coil}
750 Vrms for 1 min.
1,500 Vrms for 1 min.
Operate time*³ (at nominal voltage)
(at 20°C)
Approx. 6 ms (AC),
Approx. 5 ms (DC)
Release time (without diode)*³
(at nominal voltage)(at 20°C)
Approx. 6 ms (AC),
Approx. 3 ms (DC)
Temperature rise (at 50°C)
Max. (AC) 60°C, (DC) 40°C
with nominal coil voltage and
at 3A switching current
Shock resistance
Functional
Destructive
98 m/s² {10G}
980 m/s² {100G}
Vibration resistance
Functional
Destructive
10 to 55Hz
at double amplitude of 1mm
10 to 55Hz
at double amplitude of 2mm
Conditions for operation,
transport and storage*⁴
(Not freezing and con-
densing at low tempera-
ture)
Ambient
temp.
Humidity
–40°C to +50°C
–40°F to +122°F
5 to 85%R.H.
Unit weight
Approx. 15 g.53 oz
*³ Excluding contact bounce time
*⁴ Refer to 5. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT (Page 61).