ARJ2003 Datasheet, PDF (1/5 Pages) Nais(Matsushita Electric Works) – SMD RELAYS WITH 8GHz CAPABILITIES

RJ(ARJ2)
RJ-RELAYS ^{SMD RELAYS}
WITH 8GHz CAPABILITIES
9.00
14.0
.354
.551
8.20
.323
9.00
14.0
.354
.551
8.20
.323
FEATURES
• Excellent high frequency characteris-
tics (50Ω, at 5GHz)
V.S.W.R.: Max. 1.25
Insertion loss: Max. 0.5dB
Isolation: Min. 35dB
(Between open contacts)
Min. 30dB
(Between contact sets)
• Surface mount terminal
Surface mount terminals are now stan-
dard so there is much less work in design-
ing PC boards.
• Small size
Size: 14.00 (L)×9.00 (W)×8.20 (H) mm
.551 (L)×.354 (W)×.323 (H) inch
TYPICAL
APPLICATIONS
Measurement equipment market
Attenuator circuits, spectrum analyzer,
oscilloscope, mobile equipment, tester
Mobile telecommunication market
IMT2000, microwave communication
Medical instruments market
SPECIFICATIONS
Contact
Arrangement
Contact material
Initial contact resistance
Contact rating
Rating
Contact carrying power
High frequency
characteristics
(Initial)
(~5GHz,
Impedance
50Ω)
Max. switching voltage
Max. switching current
V.S.W.R.
Insertion loss
(without D.U.T. board’s loss)
Between
Isolation
open contacts
Between
contact sets
Input power
Expected life
(min. opera-
tions)
Mechanical (at 180 cpm)
Electrical
(at
20cpm)
1W, at 5GHz,
V.S.W.R. & 1.25
10mA 10V DC
(resistive load)
2 Form C
Gold alloy
Max. 150mΩ
1W (at 5 GHz, Impedance
50 Ω, V.S.W.R. &1.25)
10mA 10V DC (resistive load)
1W (at 5 GHz, Impedance
50 Ω, V.S.W.R. &1.25)
30 V DC
0.3 A DC
Max. 1.25
Max. 0.5dB
Min. 35dB
Min. 30dB
1W (at 5GHz, impedance 50Ω,
V.S.W.R. &1.25, at 20°C)
10⁷
10⁵
10⁶
Coil (at 20°C, 68°F)
Single side stable
2 coil latching
Nominal operating power
200 mW
150 mW
Characteristics
Initial insulation resistance*¹
Min. 500 MΩ (at 500 V DC)
Initial breakdown
voltage*²
Between open contacts
Between contact sets
Between contact and coil
500 Vrms
500 Vrms
500 Vrms
Operate time [Set time]*³ (at 20°C)
Max. 5ms
Release time (without diode)[Reset time]*³
(at 20°C)
Temperature rise (at 20°C)*⁴
Max. 5ms
Max. 50°C
Shock resistance
Functional*⁵
Destructive*⁶
Min. 500 m/s²
Min. 1,000 m/s²
Functional*⁷
Vibration resistance
Destructive
10 to 55 Hz at double
amplitude of 3 mm
10 to 55 Hz at double
amplitude of 5 mm
Conditions for operation,
transport and storage*⁸
(Not freezing and condens-
ing at low temperature)
Ambient temp.
Humidity
–30°C to 70°C
–22°F to 158°F
5 to 85% R.H.
Unit weight
Approx. 3 g .11 oz
Remarks
* Specifications will vary with foreign standards certification ratings.
*¹ Measurement at same location as "Initial breakdown voltage" section.
*² Detection current: 10mA
*³ Nominal operating voltage applied to the coil, excluding contact bounce time.
*⁴ By resistive method, nominal voltage applied to the coil, 5GHz, V.S.W.R. & 1.25
*⁵ Half-wave pulse of sine wave: 6ms, detection time: 10µs.
*⁶ Pulse of sine wave: 11ms.
*⁷ Detection time: 10µs
*⁸ Refer to 6. Conditions for operation, transport and storage mentioned in NOTES
ORDERING INFORMATION
Ex. ARJ 2
Contact arrangement Operating function
Terminal shape
Coil voltage (DC)
Packing style
2: 2 Form C
0: Single side stable Nil: Standard PC board terminal
2: 2 coil latching A: Surface-mount terminal
03 : 3V
4H: 4.5V
12 : 12V
24 : 24V
Nil: Carton packing
X: Tape end reel packing
(picked from 1/2/3-pin side)
Z: Tape and reel packing (picked
from 6/7/8-pin side)
Note: Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3-pin side) is
also available. Suffix “X” instead of “Z”.
2